jdm SIDEMIRROR wiring INFO, attention NEVERSTOP, CTCAT2049 Options

[playr158]

OK after about 10 min....3 15amp fuses and some playing

if you hook the RED wire at the MIRROR to a power source
then a GROUND to the BLACK wire at the MIRROR you get it to move DOWN
then a GROUND to the BROWN wire at the MIRROR you it to move RIGHT

thats as much info as i have now....
BUT that is not goin through the "relay/control switch" that is just wires to wires

[NEVERSTOP]

okay guys where gonna need to pool everything together that we know.

My relay has ten pin plugs on the back of it... kinda looks like this



I also didn't get the male side of the harness for the JDM relay.. so I had to make my own.. luckily I had an extra harness plug layin around and only had to add two new wires into it to make it work

and the part numbers on the back of my relay are as follows:

Green circut board #:183362

Harness (female side) #:361-2030

That how to is very helpful.. but think I will have to rely on the pin numbers and not the wire colors.

If someone else has the 10 pin style that came with the stock wires still on it PLEASE follow the diagram above for the #'s

Like:
1:white with blue strip
2:pink with silver spots

ETC