6G Celicas Forums

Welcome Guest ( Log In | Register )

> Check this out......, 3S harness conversion
post Nov 3, 2004 - 4:13 AM
+Quote Post
0Re0



Enthusiast
****
Joined Nov 13, '02
From Hawaii
Currently Offline

Reputation: 0 (0%)




If someone could ask them If theycan possibly make some for our ST & GT then .....3s swaps would be a lot easier.... Just plug and play biggrin.gif If this goes through then someone set up a group buy!!!!!

>>http://www.autosportwiring.com<<

QUOTE
AutoSport Wiring has agreed to make a set of wiring harness extensions for the 5S-FE / 3sgte / Supra ECU. With this cable, you can do all sorts of modifications without touching your stock harness. This cable plugs in between the main wiring harness and the ECU itself. SO with this harnes you can wire in all your a/f, ignition, timing and any other controls and guages witout having to touch your stock wiring. Another benefit of this item is that you can make the connections outside of the car and solder everything up nice and clean.

Will work with:

89-92 Supra
91-95 MR2
90-93 Celica All-Trac
Gen 3 Camry


Click here.....

This post has been edited by 0Re0: Nov 3, 2004 - 4:18 AM


--------------------
=(
 
Start new topic
Replies
post Nov 3, 2004 - 12:25 PM
+Quote Post
97sccelica



Enthusiast
*****
Joined Aug 30, '02
From Anaheim, CA
Currently Offline

Reputation: 0 (0%)




idk

i think all it is is to make wiring in gauges and piggy backs more easily and have better capability to go back to stock.

notice how each harness is all white, except for a select few wires?

they are probably knock, rpm, speed, maf/mas/map signal, etc.

you could have them custom make a really long one for the 3s swap, but you will still need to repin it.


--------------------
1994 Celica GT4 WRC Edition
@gt4.wrc on Instagram

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 4th, 2024 - 11:40 AM