 jdm SIDEMIRROR wiring INFO, attention NEVERSTOP, CTCAT2049 |
 Oct 10, 2004 - 12:20 PM
|
 
|
 Enthusiast  Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%)  |
OK after about 10 min....3 15amp fuses and some playing
if you hook the RED wire at the MIRROR to a power source then a GROUND to the BLACK wire at the MIRROR you get it to move DOWN then a GROUND to the BROWN wire at the MIRROR you it to move RIGHT thats as much info as i have now.... BUT that is not goin through the "relay/control switch" that is just wires to wires |
 |
Replies
|
Nov 4, 2004 - 11:23 PM
|
|
||
|
Enthusiast Joined Nov 4, '02 From Davenport Iowa Currently Offline Reputation: 0 (0%) |
 okay heres the quick version of how I did it.. will make a scematic of later on. Basically I used the stock control box to control the mirror functions ex up down lf rt. Then I used two relay boxes to reverse the polarity of the pos and neg for the retract. I also used a power window switch for the control of the mirror functions... wish it could of been different but this will work until I can locate a stock relay for the mirrors... that and my JDM control switch isnt in the greatest condition nemore. bascially what happense is when I push down on the switch the mirror fold in.. and when I push up on the switch the mirrors fold out. what happens is the wires coming out of the relays switch back and forth between pos and neg. I had to use all four of the retract pins on the mirror harness... what I did was ran the two lines off of the relays into two of the pins and then had to jump them to the other two pins for the retact on the other side of the harness.... you have to cross the wires to ex: if you look at the mirror harness and look at the outer pins there are a total of 4 pins.. two on each side that are vertical. you need to plug both wires from the relays into these and then jump both of em to the other side... but you have to make the wires cross instead of going straight across.. this might be confusing I kknow.. will lay it out clearly for you guys sometime either late tonight or tomorrow sometime... you will know real quick if you have got em wrong cuz it will make the power blink off in your car  --------------------  99 project version 3.0.. hello SEMA 2010 =) |
||
Posts in this topic
playr158 jdm SIDEMIRROR wiring INFO Oct 10, 2004 - 12:20 PM
playr158 on the mirror the two outside wires on eachside *a... Oct 10, 2004 - 3:21 PM playr158 RE: jdm SIDEMIRROR wiring INFO Oct 10, 2004 - 4:23 PM NEVERSTOP thats awesome.. I was gonna mess around with mine ... Oct 11, 2004 - 11:27 PM Coomer Don't you still need the relay box so that the... Oct 12, 2004 - 1:53 AM playr158 neverstop-no i havn't gotten them to work caus... Oct 12, 2004 - 9:09 AM NEVERSTOP wait.... relay box?? is there something I'm mi... Oct 12, 2004 - 11:33 AM playr158 no the controller thing for the door IS the relay Oct 12, 2004 - 2:30 PM NEVERSTOP okay cool
edit: hurry up! LOL j/k but I do w... Oct 12, 2004 - 9:24 PM playr158 yea well i'm on GMU's dive team, and that ... Oct 12, 2004 - 10:35 PM NEVERSTOP ne updates on this???
I messed around with mine a... Nov 1, 2004 - 12:51 AM turboinduction Heres what I got
Do you guys have this piece?
... Nov 1, 2004 - 9:51 AM turboinduction QUOTE (NEVERSTOP @ Oct 31, 2004 - 11:51 PM)
... Nov 1, 2004 - 10:11 AM Consynx blue/yellow, sounds like a remote control wire...t... Nov 1, 2004 - 10:30 AM playr158 ok we didn't get that relay box.....we only ha... Nov 1, 2004 - 11:58 AM turboinduction QUOTE (playr158 @ Nov 1, 2004 - 10:58 AM) ok ... Nov 1, 2004 - 12:03 PM playr158 lol there ya go
yea i don't have that cpu re... Nov 1, 2004 - 1:29 PM defgeph My set of mirrors are on the way, with control ... Nov 1, 2004 - 5:42 PM turboinduction QUOTE (defgeph @ Nov 1, 2004 - 4:42 PM) My set of ... Nov 1, 2004 - 5:51 PM Batman722 I just got the set that was on ebay. I am kinda ex... Nov 2, 2004 - 12:12 AM NEVERSTOP batman.. I might be interested if it has all the p... Nov 2, 2004 - 12:47 AM defgeph his are missing the relay, I was biding on those b... Nov 2, 2004 - 1:02 AM Batman722 I emailed the guy I outbid and it looks like he wi... Nov 2, 2004 - 12:21 PM turboinduction NOTICE TO ALL:
I suggest that unless you are very... Nov 2, 2004 - 12:27 PM playr158 yo if you have that relay box i want it NOW....lol... Nov 2, 2004 - 12:41 PM Batman722 TI, is there a part # on that relay box ? That wou... Nov 2, 2004 - 1:03 PM NEVERSTOP QUOTE TI, is there a part # on that relay box ? Th... Nov 2, 2004 - 1:35 PM playr158 yea if i can get a part numer i will love you fore... Nov 2, 2004 - 2:09 PM NEVERSTOP okay... think where in luck with the mirror swap..... Nov 2, 2004 - 3:04 PM BenMMellor Looks like us BRITS will have to help you guys out... Nov 2, 2004 - 3:28 PM Batman722 This is nice the site doesn't mention the rel... Nov 2, 2004 - 3:36 PM NEVERSTOP KICKA$$ ben once agian you have been not... Nov 2, 2004 - 3:37 PM turboinduction since I love you all
I'm not sure of the part... Nov 2, 2004 - 4:31 PM playr158 hmmmmmm site bookmarked for when i get the celi ba... Nov 2, 2004 - 4:39 PM turboinduction wait maybe not
Playr heres your pic
just like ... Nov 2, 2004 - 4:43 PM BenMMellor once again I can't take the credit.. one of th... Nov 2, 2004 - 4:44 PM turboinduction I just looked..... I have a Red/Yellow and a Blue... Nov 2, 2004 - 4:46 PM playr158 hmmm i could have gotten different reactions on my... Nov 2, 2004 - 4:47 PM turboinduction I would go with the site
BUT!
That site has ... Nov 2, 2004 - 4:52 PM Batman722 I will have my mirrors in about a week or so. A fe... Nov 2, 2004 - 5:09 PM turboinduction I emailed the writer of that how-to. If he emails... Nov 2, 2004 - 5:14 PM turboinduction First Reply from Silver GT
QUOTE Hi Ti,
I didn... Nov 2, 2004 - 7:27 PM NEVERSTOP okay guys where gonna need to pool everything toge... Nov 2, 2004 - 8:29 PM turboinduction RE: jdm SIDEMIRROR wiring INFO Nov 2, 2004 - 9:17 PM NEVERSTOP okay thats weird then TI.. cuz the harness I used ... Nov 2, 2004 - 10:16 PM turboinduction Hey Never, Just thought about it
I did that drawi... Nov 2, 2004 - 10:55 PM NEVERSTOP well if you read the howto thing all the wires are... Nov 2, 2004 - 11:04 PM NEVERSTOP hey one of you guys.. do me a favor really quick..... Nov 2, 2004 - 11:32 PM WannabeGT4 Hey Neverstop! You want an avatar that has a s... Nov 2, 2004 - 11:55 PM NEVERSTOP naw takes too long.. what I want is my MIRRORS to ... Nov 3, 2004 - 12:03 AM Batman722 just some posts about them from the UK board
http:... Nov 3, 2004 - 12:20 AM NEVERSTOP I give up Nov 3, 2004 - 12:39 AM turboinduction QUOTE (NEVERSTOP @ Nov 2, 2004 - 11:39 PM) I give ... Nov 3, 2004 - 1:21 AM Batman722 so no one ( USDM people ) have gotten these to wor... Nov 3, 2004 - 2:04 AM NEVERSTOP QUOTE so no one ( USDM people ) have gotten these ... Nov 3, 2004 - 3:15 AM turboinduction I'll try my JDM relay this weekend Nov 3, 2004 - 9:43 AM Batman722 jeez once I get mine I will compare what harnes... Nov 3, 2004 - 9:53 AM playr158 you have to use the JDM control not the usdm one..... Nov 3, 2004 - 1:32 PM turboinduction QUOTE (playr158 @ Nov 3, 2004 - 12:32 PM) you have... Nov 3, 2004 - 5:14 PM defgeph damn I thought you guys would make it easy for me.... Nov 3, 2004 - 5:23 PM NEVERSTOP QUOTE that is my JDM control unit. I have all the ... Nov 3, 2004 - 7:54 PM playr158 if he has everything shouldn't it be a straigh... Nov 3, 2004 - 10:47 PM Batman722 The mirrors are on the outside ? opps I screwed u... Nov 3, 2004 - 11:06 PM playr158 the two wires on the out side of either side (2 f... Nov 3, 2004 - 11:15 PM NEVERSTOP yea I just used a little 9vlt battery
think some ... Nov 3, 2004 - 11:20 PM NEVERSTOP QUOTE NEVER, you might want to try using a relay o... Nov 3, 2004 - 11:23 PM Batman722 I'm sorry to hear that anyway, my guess with ... Nov 3, 2004 - 11:46 PM 1bwilson Batman, you wire the harnesses and they will come... Nov 4, 2004 - 12:30 AM SilverGT Hey guys, the panic's over, the doctor has arr... Nov 4, 2004 - 8:50 AM Batman722 That's what I'm talking about !!... Nov 4, 2004 - 10:36 AM SilverGT How the JDM mirrors work.
There are just 2 wires ... Nov 4, 2004 - 10:42 AM turboinduction thanks SilverGt, i'm the one who emailed you
... Nov 4, 2004 - 2:05 PM turboinduction And one more.... yeah
Now assuming the break down... Nov 4, 2004 - 2:09 PM SilverGT QUOTE (turboinduction @ Nov 4, 2004 - 7:05 PM... Nov 4, 2004 - 3:04 PM SilverGT QUOTE (turboinduction @ Nov 4, 2004 - 7:09 PM... Nov 4, 2004 - 3:11 PM defgeph Sweet, I recieved my mirrors today. SilverGT than... Nov 4, 2004 - 10:09 PM playr158 yea your pins are different then mine for the cont... Nov 4, 2004 - 10:20 PM playr158 oh and i don't understand a single thing on th... Nov 4, 2004 - 10:21 PM turboinduction I've got a pink wire - anyone know what that d... Nov 4, 2004 - 10:35 PM playr158 this is how my wires are
3 top pins
top left pin ... Nov 4, 2004 - 10:42 PM turboinduction QUOTE (playr158 @ Nov 4, 2004 - 9:42 PM) this is h... Nov 4, 2004 - 10:47 PM NEVERSTOP Oh yea!
BE JEALOUS!!!
got all f... Nov 4, 2004 - 10:50 PM fastgt ass Nov 4, 2004 - 10:57 PM Batman722 you used relays ? nice. I hope that link I posted ... Nov 5, 2004 - 12:19 AM playr158 your an ass never.......how you do that then not g... Nov 5, 2004 - 12:20 AM defgeph ok,who has 5th gen mirrors and who has 6th gens.
... Nov 5, 2004 - 1:22 AM playr158 ah see thats why its different i HAVE 5TH gen mirr... Nov 5, 2004 - 2:03 AM SilverGT QUOTE (defgeph @ Nov 5, 2004 - 3:09 AM)Sweet,... Nov 5, 2004 - 5:33 AM turboinduction QUOTE (playr158 @ Nov 5, 2004 - 1:03 AM) ah see th... Nov 5, 2004 - 11:56 AM NEVERSTOP mine are 6gc ones Nov 5, 2004 - 3:38 PM playr158 curse you all wtf am i supposed to do Nov 5, 2004 - 6:55 PM SilverGT QUOTE (playr158 @ Nov 5, 2004 - 11:55 PM)curs... Nov 5, 2004 - 7:12 PM NEVERSTOP RE: jdm SIDEMIRROR wiring INFO Nov 5, 2004 - 9:49 PM Batman722 nice. Relays are fun and easy
EDIT: playr158,... Nov 5, 2004 - 9:55 PM NEVERSTOP the blue arrow is the main gear.. I had to redo th... Nov 5, 2004 - 11:09 PM Batman722 after doing some research I have a question for Sl... Nov 5, 2004 - 11:17 PM Batman722 After more research, NEVER, that is some funky rig... Nov 5, 2004 - 11:45 PM NEVERSTOP QUOTE After more research, NEVER, that is some fun... Nov 6, 2004 - 12:20 AM
playr158 can someone explain what i have to do with these d... Nov 6, 2004 - 12:24 AM |
13 User(s) are reading this topic (13 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 19th, 2025 - 10:55 PM |