![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Aug 18, '04 From NJ Currently Offline Reputation: 1 (100%) ![]() |
well i might have to replace my front axle. its making alot of wierd noises whenver i move the car and making a lound noise sometimes when i turn the wheel to the right and apply the break. i'm thinking my suspention might have f'ed it up.
well anyway it might just be a ball joint and the 2 bearing i might have to replace. but i wanna know around how much it would cost to replace the whole axle. also could the suspension have played a part in messing up the axle?? thanx |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() Joined Feb 19, '04 From austin tx Currently Offline Reputation: 1 (100%) ![]() |
The axles usually less than 100 at most places after you turn in your old one. Check the cv boots on the axles and see if they are cracked or split, and see if there is any grease around in or on the inside of your wheel. If the boot is shot, you might as well get new axles. As for noises when you move the car, that might just be worn bushings. You can usually tell if your cv joints are done with if you hear clicking noises while turning.
-------------------- ![]() |
![]() ![]() |
Lo-Fi Version | Time is now: February 25th, 2025 - 1:29 AM |