 Piston options, Just a thought |
 Nov 14, 2004 - 9:04 PM
|
 
|
 Enthusiast  Joined Dec 26, '02 From Alabama Currently Offline Reputation: 2 (100%)  |
Ok, the 7a has a 81mm bore, and so do the B-16/18 honda engines. I wonder what the difference in pin diameter and such is...
take a look: http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7933659089&rd=1 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7934016265&rd=1 http://cgi.ebay.com/ebaymotors/ws/eBayISAP...7932518309&rd=1 Any ot these would make a great set of pistons. I just don't know if they would work with the 7a rods. But hey, NICE forged pistons for like... $200, you gotta love that. Especially if we could get a general idea about the compression they would produce. Jon |
 |
Replies
|
Nov 15, 2004 - 12:57 PM
|
|
 Enthusiast Joined Nov 15, '02 From Vidor, TX Currently Offline Reputation: 1 (100%) |
STOP the best option is the sr20det pistons they are 82mm and WILL fit nice and snug ae86 guys do this alot with there 4age high comps
-DMC |
|
Nov 15, 2004 - 3:18 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
QUOTE(thedevilmaycrie @ Nov 15, 2004 - 5:57 PM) STOP the best option is the sr20det pistons they are 82mm and WILL fit nice and snug ae86 guys do this alot with there 4age high comps -DMC [right][snapback]206954[/snapback][/right] Umm... SR20 pistons are 86mm... -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Nov 15, 2004 - 3:29 PM
|
|
|
Enthusiast Joined Dec 26, '02 From Alabama Currently Offline Reputation: 2 (100%) |
QUOTE(Kwanza26 @ Nov 15, 2004 - 1:18 PM) QUOTE(thedevilmaycrie @ Nov 15, 2004 - 5:57 PM) STOP the best option is the sr20det pistons they are 82mm and WILL fit nice and snug ae86 guys do this alot with there 4age high comps -DMC [right][snapback]206954[/snapback][/right] Umm... SR20 pistons are 86mm... [right][snapback]207011[/snapback][/right] He's right. Stock honda bore is 81mm. I was just putting those up as an example. I would use 81+ overbore pistons anyway, were I to build a bottom end. There are just so many options here... I wonder how the honda/acura rods would fit a 7a crank... light weight pistons would be a huge plus, especially if they were forged. And these, like all honda parts, are hella cheap. I could get foged pistons for a B16 for $300, or for a toyo for 600. And don't say use GZE pistons because there are compression problems assiciated with them. I wonder how the compression would be on a 7ag though... See, I just don't know. I figured this would be a good topic for discussion... Such as, we know the 2zz pistons work well if you bore out the 7a, but I wonder if the rods work on a 7a crank. I have heard the 2zz crank is Remarkably similar... we just need the information to check it. |
Posts in this topic
FallenHero Piston options Nov 14, 2004 - 9:04 PM
FallenHero mostly looking towords edo and doggy on this one..... Nov 15, 2004 - 12:15 PM Kwanza26 They can potentially fit... but those specific one... Nov 15, 2004 - 12:53 PM playr158 yea, that and those are not even a good thought to... Nov 15, 2004 - 12:57 PM thedevilmaycrie not possible ive seen them get put into a 4age....... Nov 15, 2004 - 3:20 PM
Kwanza26 QUOTE(thedevilmaycrie @ Nov 15, 2004 - 8:20 P... Nov 15, 2004 - 3:57 PM FallenHero there was a guy on club 4ag supposedly running not... Nov 15, 2004 - 6:57 PM |
7 User(s) are reading this topic (7 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 24th, 2025 - 3:31 PM |