stock amp Options

[eclipse_04a]

ok, the main how to just stops talking about it, but what do i have to do? just get to the wiring, and unplug it? can i wire it up to my new deck? whats the deal? this info should be added to the howto. and where does the second smaller plug go....my wiring harness from the stock deck only has the one larger plug....am i missing something here?

[runriot95]

The HVAC controls are held back by 2 cables- a blue one and a black one.

The blue cable is to the right of the gas pedal right behind the console. Very easy to get to. There might be a cap on top but just remove the cap and slide the cable loop up and over the post.

For the black cable you have to open the hood. look on the driver's side coming through the firewall you will see a black boot and the cable coming through that and hooking on a lever. You have to use a flat-head screwdriver to remove a clip that holds the cable in place. Once you do that, the removal is the same as the blue cable. One piece of advice, I would leave the rubber boot in place and just pull the black cable through the firewall. If you exercise some caution, it will be very easy to remove.

Any more questions -ask.