My Custom Gauge Lighting, Just thought I'd share... Options

[946thGenGT]

So I took a look at the how-to on replacing the gauge lights. I proceeded to order some LED's off eBay, they arrived, so I installed them... wasn't all that impressed, they made the gauges look sort of blurry and weren't bright at all. So I decided I'd try a different route. I drilled 3 holes in the bottom of the bezel and popped the LED's in. I just wired it into the bezel itself 'cause I didn't really want to splice into the harness or anything else. I just did it this afternoon so I haven't seen it at night yet but from what I can tell inside my garage it looks pretty good. I now have no lights behind the gauges themselves but the LED's I installed are UV so I'm hoping it makes the gauges glow pretty nice. Here's some pics:



The lights look blue in the picture but they're not really at all blue.


I thought I had measured the spacing out pretty good but as you can see the rightmost LED is a little too far to the right... I'll live with it for now but if it starts to annoy me later I'll probably fix it. Let me know what you guys think...

[6gcs3nz]

Hey! Finished mine... I can see what you mean by the camera only able to see UV as blue... anywayz - the glow is more purple UV rather than blue.

Here's my morning/evening shots



...and...



I took what you said and the plastic cover would have reflected the UV, so I mounted 3mm UV LED's into an angle bezel and installed it facing the guages.

Thanks 946thGenGT - I wired them to the bulb connectors at the back like you said.