Wiring subs? |
Wiring subs? |
Nov 29, 2004 - 12:43 AM |
|
Enthusiast Joined Jul 16, '04 From Los Angeles Currently Offline Reputation: 8 (100%) |
Ill be running two of these http://www.cardomain.com/item/KIC03C104
OK after a small bit of research i have found that i should use a 2 ohm mono amp and wire the two 4ohm subs in parallel. NOW my question is What should the amp put out to the speakers? Should it be the RMS of both amps or jsut the RMS of one amp. ex. if the rms is 100w then should the amp put out an rms of 100w or 200w because im running two. Im also looking to not spend a lot. Could i jsut run a 2 chan amp and each of the two subs off of one of the two chanels. Or would that not get me good sound. This post has been edited by urbandork: Nov 29, 2004 - 1:08 AM |
Nov 29, 2004 - 3:29 PM |
|
Enthusiast Joined Nov 8, '04 From Carmi, Illinois Currently Offline Reputation: 0 (0%) |
no, the subs handle 125rms, you want to send them Atleast that amount, the JBL 300.1 will send them 150rms a piece, you will be fine with this amp, it matches perfectly well, and for the price it cannot be beaten.
-------------------- i want a stereo so loud, it blows womens clothes off.
TrickedOutS2000: I just opened a box that arrived on my doorstep cuz i thought it was my H.U. TrickedOutS2000: it was a vibrator my dad bought scarr3ll: WHAT THE ****?!?11 TrickedOutS2000: yeh TrickedOutS2000: for my mom im guessing TrickedOutS2000: but yeah TrickedOutS2000: eww TrickedOutS2000: so TrickedOutS2000: ****ing TrickedOutS2000: wrong My Cardomain Page. Car Audio Central msn: jared_s_c@hotmail.com aim: Scarr3ll |
Lo-Fi Version | Time is now: January 11th, 2025 - 1:54 AM |