any way to make 17x7s look flush, without using spacers |
any way to make 17x7s look flush, without using spacers |
Dec 2, 2004 - 8:02 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
is there any way that a normal 17x7 wheel will look flush with the body of the car? is there an offset that would do the trick, or do we need the right offset and wheel width ?
-------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Dec 3, 2004 - 1:02 PM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
just need the right offset, it was somewhere around 32--35 if i rember correctly
-------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Dec 3, 2004 - 1:49 PM |
|
Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
QUOTE(presure2 @ Dec 3, 2004 - 6:02 PM) just need the right offset, it was somewhere around 32--35 if i rember correctly [right][snapback]216283[/snapback][/right] That would just about do it. I'd go as far as saying something in the high 20's can fit snug in the rears... while the fronts might require 30's to clear stuff. The only way to do it correctly is to either change the wheels and wheel offset or get spacers. -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
Lo-Fi Version | Time is now: November 25th, 2024 - 9:39 PM |