I'm screwed..., pics included. RE: transmission casing. Options

[Mynzeyes]

well...the past couple of days, i've noticed some vibrations, mostly on starting the car..and very hard thuds when shifting semi-roughly... so i finally got around to checking out what i thought was the problem, and it was much worse than i suspected...

Pics:




if you need to know what that is..that's the rear transmission mount, by the steering rack and firewall, etc.

that mount should NOT be disconnected like that..and the tranny casing should NOT be broken like that...incase you didn't know. .

i'm going to try to get it welded...but, if that doesn't hold, there's always the option of a 4AGE transmission w/ a new clutch. . but that's really unnecessary. ::shrug::

-John-

[doGGy]

John, i have the same problem, my tranny was damaged then i bought the car, i have broken motor mounts in the back and in the front... BUT Get the tranny out, find some shop that weld aliuminium, and they will weld your trany. i did this, and hade no problem 3 years already