FMIC idea, y woudlnt it work Options

[urbandork]

After looking at pix of 3sgte swamps most ppl have trouble running the pipe to a fmic cus of where the exhaust manifold is.

I was thinking y not just use two rather long but short incoolers. but one on top of the other and run the piping through one and out the other kinda like a but U.

This seems like a simple solution to a problem. Ive never seen this dun so there must be a reason y not. Cost? airflow restiction?

basically it would look like this (front vew)

|----INTERCOOLER1---(outlet to intake manifold)
|
|----INTERCOOLER2----(inlet from tubo)

| and - are piping

[shid]

I'm no sure if he's talking about running the intake pipe over the engine- like you have lagos (which isn't idle) or.. what.. I dunno what he's talking about if it's not the "over the engine" problem -where the intake air gets heated up to almos the point the turbo heated it up to before the IC.