Projectors, Yup! Options

[FreddyTheOthaMea...]

Sorry if this is a repost (I'm almost positive it is but im too doped up to want to search for my answer) but where can I buy some projector headlights at?
Anyone.... Anyone?... Ferris?

[doGGy]

if you took the metal wall from one projector and replacet it in another, it would be compleatly the same Cuz if you look closly into these pics you might understand, that the wall has to be rotated, that the cut of was in different direction.

the lines of cut off on the LHD goes like this:
________/'''''''''''''''''''''


and on RHD it goes liek this:

'''''''''''''''''''\__________

you get the point? So the RHD walls need to be fliper horizontaly


And about boiling water, the longer you will boil your headlight, the easyer the glass will take off. It is harder to brake plastic glass, i was scear to remove the stock glasses too (and they are made of real glass, and it not bends it breaks), but once i used boiling water, i saw that it was easy job
Boil the headlight for about 15 min, and i can garante you that the fornt glass will remove easily.. And dont try to get whole headlight under water, make sure that the half of the headlight (front glass must be unde water), was under water, and youll be ok, if the glues doesnt relise easy, then try to boil it again...

This post has been edited by doGGy: Dec 22, 2004 - 1:29 AM

[Fietsbel]

if you took the metal wall from one projector and replacet it in another, it would be compleatly the same Cuz if you look closly into these pics you might understand, that the wall has to be rotated, that the cut of was in different direction.

the lines of cut off on the LHD goes like this:
________/'''''''''''''''''''''


and on RHD it goes liek this:

'''''''''''''''''''\__________

you get the point? So the RHD walls need to be fliper horizontaly


And about boiling water, the longer you will boil your headlight, the easyer the glass will take off. It is harder to brake plastic glass, i was scear to remove the stock glasses too (and they are made of real glass, and it not bends it breaks), but once i used boiling water, i saw that it was easy job
Boil the headlight for about 15 min, and i can garante you that the fornt glass will remove easily.. And dont try to get whole headlight under water, make sure that the half of the headlight (front glass must be unde water), was under water, and youll be ok, if the glues doesnt relise easy, then try to boil it again...
[right][snapback]224965[/snapback][/right]

My hero!, thanks for the explanation.