Turbo Q's Options

[d3monc3lica]

Ok so I'm buying a basic turbo setup from another person on here and I was wondering, due to the fact that with this purchase im only recieving a Turbo with internal wastegate, Manifold, MAP box, oil lines, FMU, BOV, and downpipe I know that I can't just bolt this thing on and get it to work (Note, there is not intercooler but does come with piping to the intake manifold), my plans as of now are to:
Buy a SAFC, OBX Fuel Rail, Venom Injectors and possibly fuel-pump.
Now because the 6gc has a higher compression pistions and I know its bad to run boost on high compression, shoild i 100% swap the pistons out with lower compression ones or is there a way to run LOW boost with all the fuel management there. I plan on buying the intercooler and turbo timer and boost controller too but after the fuel management, but i need input, this is my first boosted car and no i dont mean stolen lol. Thanks

[nik]

So someone want to turbo the 7afe cool i agree with doggy run a intercooler and make sure your fuel system has been beef up alittle.I did find one site that sells the 7afe piston in low comp 8.5:1 i posted the site a few times on here http://www.importperformanceparts.net/imports/pek-geo.html.
Metal is good or a copper head gasket only one or two places make them for 7afe or you can get one custom made.Or just try and find a 4age which will probably be easier.

i would go greddy e-manager better tuning capability as for the intercooler piping i have one guy on here that wants it but if he falls through its all yours if you want to buy the set up. Doggy is getting Carbon Fiber piping that he is making himself that will be hott when its done.

This post has been edited by nik: Dec 28, 2004 - 10:51 AM