Starting 3sgte project, 7afe -> 3sgte motor mount question Options

[94silverst]

Hey everyone!

Well my 7afe is finally giving out! I cracked a few piston rods and now can finally start my new 3sgte project. But before I start, I have a few questions: (keep in mind that I don't know a whole lot about engines but will be working with a mechanic on the swap)

1) How hard is it to make the motor mounts for the 3sgte? Should I do it myself or take it some where?

2) Are 3sgte eBay engines reliable?

3) What tranny should I use and is it an easy swap?

I have looked though past posts, and found some facts leading to some of the answers, but would really like to clear it up 100%.

Thanks everyone!!

Would this be a good buy?
eBay

This post has been edited by 94silverst: Jan 6, 2005 - 7:03 PM

[csnow]

If the mechanic has never done it before, you may end up with a lot of trouble with the ECU and wiring harness. The motor mounts have to be moved and you will need the tranny that comes with the 3S clip. Get the MR2 if possible as it is a better tranny. I would play it safe and ship the car to a place that has done it before. These are the guys that I will be getting to do my 7AFE swap.

HTH,

http://www.xatracing.com/