alarm help needed, almost done.... Options

[forkee]

1) i have a manual transmission. how do i bypass the clutch button without buying some rediculous bypass switch, module, etc.? anyone just put a metal plate over it or something?

2) i have power door actuators with a green and blue wire. my alarm is supposed to come with power door relays built into the brain, hence it only has 2 wires that are supposed to go to the doors, a blue and a green. do i just match the colors?? cuz its not working for me........what does that diagram mean in the car installation guide? are those relays i have to go and buy?

3) wheres the parking brake wire? i need to connect to this for my turbo timer to work.

4) i have an orange wire for anti-grind. any idea where this hooks up to?

ive been looking all over the forums for this information but nobody has any clear and precise information.

[forkee]

1. thanks, im gonna check it out today.

2. i dont have power door switches, everything is manual. its just that the actuators were there so now what do i do?

3. thats for the normal brake pedal and not the parking/ emergency brake (or is it the same wire for both??)

4. the instructions say its a wire that provides a ground source so that a relay is activated for anti-grind, etc. does that mean it just gets connected to the black wire?

thanks

[Pali_playa]

then u should just have to tap into the actuator wires, if they work

ive never heard of a alarm that uses the emergencey brake....r sure its not the normal brake?

bout the antigrind, im not too familar with them b/c i install DEI and they have anti grind built in