..., ... |
..., ... |
Jan 23, 2005 - 11:28 PM |
|
Enthusiast Joined Aug 27, '04 From Orange County, CA Currently Offline Reputation: 0 (0%) |
...
This post has been edited by erics1one: Sep 22, 2009 - 11:15 AM -------------------- |
Jan 28, 2005 - 9:56 AM |
|
Moderator Joined Oct 1, '02 From fall river, ma Currently Offline Reputation: 13 (100%) |
eric, id do a compression test, just to be on the safe side, before you do anything else.
have you checked all your small vac lines around the engine bay to make sure none have popped off of , or are leaking? as far as your oil feed & return lines. your feed should be a -3an size line, no bigger. the return should be a -12an size line, and it is very important to keep it as straight a path to the pan as possible, with no sharp bends, and as "vertical" as possible, to promote drainage. what are you using for injectors? (just curious) HTH manny -------------------- Former Team 5SFTE pro member ;)
13.6@108MPH, 5SFTE Powered |
Lo-Fi Version | Time is now: November 28th, 2024 - 2:47 AM |