 oil pump gasket/timing belt, car wont start |
 Feb 27, 2005 - 9:37 AM
|
 
|
|
Enthusiast  Joined Feb 3, '03 From Pensacola Florida Currently Offline Reputation: 0 (0%)  |
ok heres the deal, this is a 94 gt (2.2l) i had to change out the oil pump gasket since it was leaking about 2 quarts a day, while i was in it i changed the tiiming belt also. I had the marks lined up, and while i had the covers off and motor mount etc off i cranked it up to make sure i had it set right. Well it started up fine. So, i put everything back together and now it wont start. It spins over but makes no attempt to fire up at all. So far ive checked fuel pressure (good) , spark is correct ( i pulled a wire to make sure it was working) , and double checked timing by putting the crank mark on 0 and checking the rotor button. So i have spark fuel and air, but still no startup. Currently im into the computer wiring hoping i may have stretched or pulled a wire loose somewhere, and that is taking forever. Has anyone had this problem before? the computer isnt throwing any codes (i cant really crank it anyway so it stays in open loop), so i dont really know what to do except go one wire at a time and try to find a missing link. If u guys have any suggestions it would be appreciated, thanks
Dave |
 |
Replies
|
Feb 27, 2005 - 11:12 PM
|
|
|
Enthusiast Joined Apr 22, '04 From illinois Currently Offline Reputation: 0 (0%) |
What the heck is an oil pump gasket?
--------------------  The most important lesson I learned from Karate-Dō Kyōshan – “You can not be what you do not believe you are” |
Posts in this topic
DavezXTC oil pump gasket/timing belt, car wont start Feb 27, 2005 - 9:37 AM
spunky393 Here's what my dad has concluded about your pr... Feb 27, 2005 - 11:14 PM
rjbibeau QUOTE(spunky393 @ Feb 28, 2005 - 4:14 AM)Here... Feb 28, 2005 - 2:38 PM 97GTinKC what about the crank position sensor? get it plugg... Feb 28, 2005 - 12:30 AM DavezXTC well from what ive read the crank sensor is on the... Feb 28, 2005 - 5:22 PM DavezXTC this is really frustrating and i keep hoping its s... Feb 28, 2005 - 5:24 PM spunky393 Try this, when your turning the engine over to sta... Feb 28, 2005 - 9:57 PM DavezXTC just tried that, no change, testing fuel pressure ... Mar 1, 2005 - 1:37 PM macavely make sure ur go back get ur timeing mark centerd..... Mar 1, 2005 - 1:57 PM DavezXTC Update: after tossing a few new parts at it i fina... Mar 25, 2005 - 1:13 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 2:43 AM |