 7agte build diary, my progress so far |
 Feb 28, 2005 - 3:46 PM
|
 
|
 Enthusiast  Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%)  |
Feb 25 2005
recieved intake manifold w/ throttle body (small port) stock cams gears (small port) oem FPR fuel rail (big port) (( from Bee aka kwanza )) big port head from a 4agze ebay Feb 28 2005 i drop the head off at F-Tuning (local shop) to get the head pressure checked if good the head will get fully tuned new valve spring P&P etc. sent money off to a MR2 member for a AE101 LEVIN MAP/DLI 4AGZE 1992+ MAP/DLI engine wiring harness also bought 440 cc 7mgte injectors 4ag AEM adjustable cam gears talking to frotou about a custom manifold Need to talk to the shop about what cams to use i'm thinking 256 intake 243 exhaust March 1 2005 things a need to do track down DLI coils and distributor track down a 92+ levin Map ecu ( any help on this one will be a big help) This post has been edited by nik: Mar 11, 2005 - 12:39 PM -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
 |
Replies
|
Feb 28, 2005 - 4:34 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Hey nik... that manifold is smallport. I told you that eh... PM me...
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Feb 28, 2005 - 5:05 PM
|
|
|
Enthusiast Joined Sep 30, '02 From Washington Spokane / Coeur D' Alene Idaho Currently Offline Reputation: 11 (100%) |
QUOTE(Kwanza26 @ Feb 28, 2005 - 2:34 PM) Hey nik... that manifold is smallport. I told you that eh... PM me... [right][snapback]251370[/snapback][/right] whats the air flow difference between the small and big manifolds i want as much flow as i could get -------------------- yea your 3sgte is cool but ill stick to my 7agte
|
Posts in this topic
nik 7agte build diary Feb 28, 2005 - 3:46 PM
FallenHero small port=more velocity less volume. the large p... Feb 28, 2005 - 11:00 PM nik UPDATE
March 3 2005
found a 3 gen 4agze map ecu o... Mar 3, 2005 - 3:45 PM nik this is what i want my motor to look like Mar 7, 2005 - 6:08 PM
FallenHero QUOTE(nik @ Mar 7, 2005 - 4:08 PM)this is wha... Mar 7, 2005 - 10:19 PM nik QUOTE(FallenHero @ Mar 7, 2005 - 8:19 PM)QUOT... Mar 15, 2005 - 4:03 PM nik update:
March 10 2005
3rd gen 4agze map ecu cam... Mar 11, 2005 - 12:37 PM nik well there is a company in canada doing 7ag conver... Mar 14, 2005 - 4:21 PM nik update March 15 2005
i won some new 8.0:1 4agze p... Mar 15, 2005 - 1:12 PM doGGy Nik, if ya going with the same Exhaust Mani, be pr... Mar 17, 2005 - 4:47 PM FallenHero wait, you are going to cut off the B-series flange... Mar 15, 2005 - 3:33 PM nik QUOTE(FallenHero @ Mar 15, 2005 - 1:33 PM)wai... Mar 15, 2005 - 3:56 PM FallenHero nice. that's what I like to see. Outside the... Mar 16, 2005 - 10:38 PM nik QUOTE(FallenHero @ Mar 16, 2005 - 8:38 PM)nic... Mar 17, 2005 - 10:16 AM FallenHero hey, if it works for you that rocks. I just want ... Mar 17, 2005 - 2:55 PM nik QUOTE(FallenHero @ Mar 17, 2005 - 12:55 PM)he... Mar 17, 2005 - 5:27 PM nik Picture from inside TEAM 66
this is the bigport... Mar 28, 2005 - 11:05 AM nik update
April 2 2005
went and bought a block wit... Apr 5, 2005 - 10:43 AM nik update
april 14 2005
i got the block all torn a... Apr 14, 2005 - 9:39 AM playr158 how much is the bore costing you?
and isn't t... Apr 14, 2005 - 10:48 AM nik QUOTE(playr158 @ Apr 14, 2005 - 8:48 AM)how m... Apr 14, 2005 - 11:06 AM playr158 oh gotcha used the pipes but cut them off and used... Apr 14, 2005 - 11:24 AM nik QUOTE(playr158 @ Apr 14, 2005 - 9:24 AM)oh go... Apr 14, 2005 - 11:32 AM nik I'm going in today for an update on everything... Apr 14, 2005 - 12:45 PM nik update
my rod got sent out to have custom ones m... Apr 18, 2005 - 1:57 PM Mike431635 Hey nik, how close are the runners on that B-serie... May 1, 2005 - 9:21 PM FallenHero the 7afe and 4age heads are remarkably similar. T... May 1, 2005 - 11:03 PM Kwanza26 The spacing between the B series manifold and 4AG/... May 2, 2005 - 12:01 AM FallenHero QUOTE(Kwanza26 @ May 1, 2005 - 10:01 PM)The s... May 2, 2005 - 12:12 AM Kwanza26 QUOTE(FallenHero @ May 2, 2005 - 5:12 AM)QUOT... May 2, 2005 - 12:22 AM nik on my manifold i had 2 options leave the oval part... May 2, 2005 - 9:03 AM playr158 i'm guessing cut it at round
and branch from t... May 2, 2005 - 11:03 AM nik QUOTE(playr158 @ May 2, 2005 - 9:03 AM)i... May 2, 2005 - 11:35 AM nik update 5/2/05
ordered ACT 6 puck clutch today
dro... May 2, 2005 - 2:17 PM FallenHero I am using your thread nik.
So what is the bigge... May 4, 2005 - 12:18 PM nik QUOTE(FallenHero @ May 4, 2005 - 10:18 AM)I a... May 4, 2005 - 12:32 PM Kwanza26 I believe the largest bore you can get before seri... May 4, 2005 - 12:40 PM playr158 i was considering an 83mm bore on my 7afte when i ... May 4, 2005 - 2:10 PM nik update
last night at 12:34am
I won a Stand Alon... May 5, 2005 - 12:18 PM nik update
piggy back came yesterday i just need to ... May 11, 2005 - 9:35 AM nik update a little break down
-7agte engine whp= ... May 18, 2005 - 10:33 AM doGGy Nik, did you got back the stock rods? May 18, 2005 - 11:12 AM nik updates and pic you guys were waiting for May 25, 2005 - 9:44 AM playr158 nice nice nice
and which honda manifold is that? May 25, 2005 - 10:25 AM nik QUOTE(playr158 @ May 25, 2005 - 8:25 AM)nice ... May 25, 2005 - 10:31 AM playr158 i know a b-series
but which one
there are many di... May 25, 2005 - 12:24 PM nik QUOTE(playr158 @ May 25, 2005 - 10:24 AM)i kn... May 25, 2005 - 12:43 PM nik UPDATE 05/25/05
ordered springs and titanium reta... May 25, 2005 - 12:49 PM nik QUOTE(FAQdaWorld @ May 25, 2005 - 11:16 AM)I ... May 25, 2005 - 1:58 PM playr158 yea i noticed that you took it out May 25, 2005 - 2:50 PM nik QUOTE(playr158 @ May 25, 2005 - 12:50 PM)yea ... May 25, 2005 - 3:53 PM Kwanza26 That's a nice looking manifold. Hope it doesn... May 25, 2005 - 3:53 PM nik QUOTE(Kwanza26 @ May 25, 2005 - 1:53 PM)That... May 25, 2005 - 4:01 PM Kwanza26 QUOTE(nik @ May 25, 2005 - 9:01 PM)QUOTE(Kwan... May 25, 2005 - 4:17 PM nik QUOTE(Kwanza26 @ May 25, 2005 - 2:17 PM)QUOTE... May 25, 2005 - 4:45 PM playr158 i was noting the inch that got cut out May 25, 2005 - 4:03 PM nik he he
here somemore pics the puater custom rod... May 26, 2005 - 3:48 PM frotou Love the rods, I need them !!!!... May 26, 2005 - 3:57 PM doGGy Nik - i love you May 26, 2005 - 3:58 PM FallenHero I am told that oil squirters are great on some of ... May 26, 2005 - 10:52 PM Kwanza26 Them's is some nice lookin rods... ;] May 27, 2005 - 12:01 AM FallenHero sowa.. ignition wise, I am ignorant. What is the ... May 29, 2005 - 4:54 PM doGGy Acurancy.
Less resistance in wires and lots of ot... May 29, 2005 - 5:18 PM FallenHero So I have seen the megasquirt guys using the dual ... May 29, 2005 - 6:33 PM Dr_Tweak Nik, have you tried lining the B series manifold u... May 29, 2005 - 10:46 PM FallenHero he purchased a 4age header flange and welded it in... May 29, 2005 - 11:04 PM Dr_Tweak QUOTE(FallenHero @ May 30, 2005 - 4:04 AM)he ... May 30, 2005 - 7:37 PM nik sorry guys right after i posted those rod pics i l... May 31, 2005 - 9:19 AM FallenHero yo, post up the specs on the size of those rods... May 31, 2005 - 12:04 PM nik QUOTE(FallenHero @ May 31, 2005 - 10:04 AM)yo... May 31, 2005 - 12:13 PM Kwanza26 One thing I should ask. Is that a 7AFE head gaske... Jun 1, 2005 - 3:27 AM nik QUOTE(Kwanza26 @ Jun 1, 2005 - 1:27 AM)One th... Jun 1, 2005 - 8:54 AM Kwanza26 QUOTE(nik @ Jun 1, 2005 - 1:54 PM)QUOTE(Kwanz... Jun 1, 2005 - 10:47 AM nik the coolent ports at the bottom of this pick
the... Jun 1, 2005 - 10:56 AM nik yeah springs and retainers are in the top end i... Jun 3, 2005 - 4:58 PM Kwanza26 I say you should get a 4AG headgasket, to avoid ho... Jun 3, 2005 - 6:53 PM Mike431635 That's a good point. I think you might want to... Jun 3, 2005 - 11:45 PM nik QUOTE(Kwanza26 @ Jun 3, 2005 - 4:53 PM)I say ... Jun 6, 2005 - 3:14 PM Dr_Tweak Yes but Nik, did you try lining it up with the 7AF... Jun 7, 2005 - 12:21 AM Kwanza26 QUOTE(Dr_Tweak @ Jun 7, 2005 - 5:21 AM)Yes bu... Jun 7, 2005 - 12:36 AM nik QUOTE(Dr_Tweak @ Jun 6, 2005 - 10:21 PM)Yes b... Jun 7, 2005 - 9:09 AM nik these are about 2 weeks old
the cam shaft... Jul 21, 2005 - 9:40 AM FallenHero man, is that your garage or the shop? There are p... Jul 22, 2005 - 3:22 PM nik QUOTE(FallenHero @ Jul 22, 2005 - 1:22 PM)man... Jul 22, 2005 - 4:26 PM nik updated pic will be up this weekend of the car and... Aug 18, 2005 - 10:48 PM FallenHero if the 255 is good enough for a supra, it's go... Sep 12, 2005 - 8:13 PM nik QUOTE(FallenHero @ Sep 12, 2005 - 6:13 PM)if ... Sep 13, 2005 - 4:40 PM Coomer Sick project Nik! I can't wait to see this... Sep 14, 2005 - 7:04 PM presure2 QUOTEwalbro have that wine to them i wanted to go ... Sep 15, 2005 - 9:50 AM nik QUOTE(presure2 @ Sep 15, 2005 - 7:50 AM)QUOTE... Sep 15, 2005 - 10:06 AM presure2 QUOTEthanks for the info its just my pet peve thin... Sep 15, 2005 - 10:25 AM nik QUOTE(presure2 @ Sep 15, 2005 - 8:25 AM)QUOTE... Sep 15, 2005 - 12:34 PM nik nothing to report porject still going just slowed ... Oct 5, 2005 - 9:47 AM presure2 nik, that seriously sucks big time man.
hope you c... Oct 6, 2005 - 8:15 AM |
2 User(s) are reading this topic (2 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 27th, 2024 - 9:22 AM |