question for all 3sgte owners, car slightly pulls to the right Options

[lagos]

ever since my swap, my car has slightly pulled to the right. it only happens when i give the car gas. other then that it drives perfectly straight. i took the car to a few shops and none of them can tell me what is causing the problem. had the alignment done and eveyrthing......one guy mentioned that bad motor mounts can sometimes cause the car to pull to one side. so im trying to figure out if the way i have my mount setup has anything to do with my problem.

the 3sgte has a bracket on the passengers side of the motor with 2 or 3 holes in it, and then the motor mount connects to that when you put your motor in.... when you guys did your swap, did you swap over to the 5sfe bracket, or keep the 3sgte one?

i kept my 3sgte one. it seem to work, but you can only use 2 bolts to connect the mount to the bracket because the 5sfe motor mount dosnt line up 100%.
what did eveyone (5sfe-3sgte) else do with that mount?

oh and no, its not TQ steer. this happens when i baby the car and just give it a little bit of gas. i mostly notice it on the highway.

This post has been edited by lagos: Mar 2, 2005 - 12:35 AM

[lagos]

mac.... i know what you are saying, but its not TQ steer.... this happens when i give the car very little gas and drive it in what i call "5sfe mode". shifting at 3 grand and trying to drive slow.

i think it has something do to with that mount or maby my control arms or maby my tires?

This post has been edited by lagos: Mar 2, 2005 - 12:44 AM