Identify This Plug(USDM ST) |
Identify This Plug(USDM ST) |
Mar 6, 2005 - 1:40 AM |
|
Administrator Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%) |
So I've got this extra plug from my modified harness sitting in my engine bay, and I'm curious as to what it's for. Here's the plug:
Now, my car is five-speed '94 USDM Celica ST. The car had A/C from the factory. Any ideas as to what this plug is for?
Attached image(s)
-------------------- New Toyota project coming soon...
|
Mar 6, 2005 - 11:52 PM |
|
Enthusiast Joined Mar 8, '04 From Newport, RI Currently Offline Reputation: 63 (99%) |
OK I took some pics. I didn't resize them so you can see them better.
the bad news is I didn't find the exact plug but I did find one very very similar. It was the only one with ONE wire to it in that area. ( blue wire ) first the area pics of plug pic of it plugged in (dead center ) it is probably a coolant temp sensor. It is plugged in right next to the lower radiator hose ( thermostat housing I think ) it was the only one that was on that side of the bay with one wire that I could find. I would assume the 94-95 are the exact same but maybe not. Maybe I am looking in the wrong area ? hope that helps. I will check again tomorrow morn when it is light out. -------------------- |
Lo-Fi Version | Time is now: January 11th, 2025 - 9:34 PM |