 Wheel stud replacement, question |
 Mar 10, 2005 - 2:11 AM
|
 
|
|
Enthusiast  Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%)  |
Simple question. When replacing the wheel studs, do you need to take off the hub?
-------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
 |
Replies
|
Mar 10, 2005 - 10:00 PM
|
|
 Enthusiast Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) |
Tap it out. You'll need to remove the caliper and turn the hub till the stud you want to remove is on the caliper side. It's different for every car, but I believe there is enough space to tap out the stud once the caliper is removed. Usually Toyota is good about drilling out a spot or leaving space for stud removal.
-------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
|
Mar 10, 2005 - 10:25 PM
|
|
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(Kwanza26 @ Mar 10, 2005 - 10:00 PM) Tap it out. You'll need to remove the caliper and turn the hub till the stud you want to remove is on the caliper side. It's different for every car, but I believe there is enough space to tap out the stud once the caliper is removed. Usually Toyota is good about drilling out a spot or leaving space for stud removal. [right][snapback]255869[/snapback][/right] Thank you. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
Posts in this topic
jgreening Wheel stud replacement Mar 10, 2005 - 2:11 AM
Drocay yea i need this too, last person who touched my ol... Mar 10, 2005 - 2:23 AM Hanyo from my experience..
yes you need to remove the ... Mar 10, 2005 - 5:28 AM 97GTinKC The shop manual says you can do it without removi... Mar 10, 2005 - 12:29 PM prpnum1 you dont need to remove the hub. i just did this r... Mar 10, 2005 - 12:45 PM jgreening How do the old ones come out? Mar 10, 2005 - 12:51 PM jgreening Anyone? Mar 10, 2005 - 9:51 PM
S_C_M Kwanza26 is correct as usual. You can hammer the ... Mar 12, 2005 - 5:24 PM prpnum1 yup that is it you can use the lug nuts to tighten... Mar 12, 2005 - 6:09 PM
97GTinKC tapping out is ok, dont get carried away, could d... Mar 15, 2005 - 1:19 PM |
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: December 2nd, 2024 - 9:22 PM |