FS: 3S-GE BEAMS, From club4ag. Options

[DustyBurns30]

there is some guy on club4ag.com selling 2 3s-ge beams engines, on of which come with harness, ecu, and 6 speed rwd tranny. plus, he's got a 2nd and 3rd gen 3s-gte for sale.

just thought all you beams freaks would like to know.

[Digndoug]

why would u ditch a 2jz for a beams?

i was talking about using the 6 speed with the 2jz.
[right][snapback]256461[/snapback][/right]

i doubt it would work, those are two completly dif engines.

[Kwanza26]

why would u ditch a 2jz for a beams?

i was talking about using the 6 speed with the 2jz.
[right][snapback]256461[/snapback][/right]

i doubt it would work, those are two completly dif engines.
[right][snapback]256515[/snapback][/right]

Actually, it's a W series tranny, so it may very well bolt up to the 2JZ.

Here's some info... 22R (trucks/rwd celicas) bolts up to the same tranny as the 3/5VZ (trucks and tacos), the 3/5VZ is the same as the 2VZ (early 2.5 camrys), the 2VZ is the same as the 1MZ (later 3.0 Camrys solaras), the 1MZ shares a pattern with the 3SGE, which shares with our very own 5SFE... A popular direct swap for the trucks, 7MG, which bolts up to that same 22R bell, and strangely enough, the 7MG's also share the same trans pattern with the 1/2JZ...

There are minor differences between the bellhousings, such as shaft sizes and splines, etc... but the bell housing patterns are all rpetty much the same.

This post has been edited by Kwanza26: Mar 12, 2005 - 8:53 PM