quick help on motor mount, 5th gen Options

[redtcel]

my front motor mount is busted. toyota wants 125 plus shipping and it wouldnt be here for a week, im going to go to the wrecking yard today and i know they have 5th gen gt's, but not sure if htey have 6th gens, if they do have a 5th gen does any one know if the 5th gen motor mounts are similar or the same as the 6th gen?

This post has been edited by redtcel: Mar 12, 2005 - 1:58 PM

[Bigmeanbulldog55]

What mount you need? I've got one for sale.

[redtcel]

What mount you need?  I've got one for sale.
[right][snapback]256806[/snapback][/right]

5th ggen turned out to be wrong size, the bolt patterns was off, and the center hole for the connection of th emount to the bracket was too larger of a diameter, i need the front motor mount, when you are looking in the motor the one that is right behind the radiator

[Bigmeanbulldog55]

What mount you need?  I've got one for sale.
[right][snapback]256806[/snapback][/right]

5th ggen turned out to be wrong size, the bolt patterns was off, and the center hole for the connection of th emount to the bracket was too larger of a diameter, i need the front motor mount, when you are looking in the motor the one that is right behind the radiator
[right][snapback]256881[/snapback][/right]

Sorry, I've got the rear mount. The one that went you look at the motor it's on the right. I had to buy that mount that you're looking for. There's a way to make your own urithane bushings for the mount. Take what you've got, and cut out the rubber part. Lay it on a flat surface. Pore liquid urithane into the hollowed out mount. It should cost less to do than buying a regular mount, and it's urithane.