6G Celicas Forums

Welcome Guest ( Log In | Register )

> Bump bump ::silence:: bump bump
post Mar 8, 2005 - 3:50 PM
+Quote Post
FreddyTheOthaMea...



Enthusiast
***
Joined Feb 8, '04
From Thornton, CO.
Currently Offline

Reputation: 1 (100%)




Ok so here's my problem: I just upgraded my system (1 10" alpine r in a large sealed enclosure... I'll get pics..) and sometimes my system just stops bumping intermittently.. Amps not runnin hot, voltage is constant, ground and power wires are all properly ran and connected/grounded.. Any ideas? Anyone?


--------------------
Fred
"...Armed with backbone and busted zoo gates, promising you from the bottom of my harmonica pocket - FOREVER - you will never have another lonely holiday..."

IPB Image
 
Start new topic
Replies
post Mar 16, 2005 - 4:43 PM
+Quote Post
danny_t82

Enthusiast
*
Joined Dec 2, '04
From Surrey, England
Currently Offline

Reputation: 0 (0%)




I also had this problem repeatedly until lately. Sometimes the sub would work fine, other times (usually for the first ten minutes of driving) the amp would switch on and off every few seconds, real irritating! I ran the remote and RCA leads down through the centre of the car via the console and uner the carpet, whereas previously it ran side by side with the power cables in the duct under the door sill. Now it works fine and I can only put it down to the power cable inducing a false current in the remote cable, my cd changer also sounds slightly better now too. I'm guessing you too are running all your cables together so I would suggest seperating them out as I did.

Hope this works for you.

Dan T

Posts in this topic


Reply to this topicStart new topic
3 User(s) are reading this topic (3 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 10:44 AM