 RWD Celica, Swapping Supra drivetrain into Celica |
 Mar 14, 2005 - 5:19 PM
|
 
|
 Enthusiast  Joined Mar 9, '05 From Charlotte Currently Offline Reputation: 0 (0%)  |
I know some might flame me for this but I was doing some research and the Supra is almost the same size as the Celica, wheelbase is only around 23mm apart and the width hopfully rotor to rotor (still need to get exact measurement) is only 98mm apart. the width wont be much of a problem due to the flare on the rear fenders and length can be overcome by a custom bellhousing that will be required. I got the idea from the Top Secret Supra. I know the Getrag will be a tight fit but it might be possible to do this without cutting the firewall. I'm know most of the parts I need and I know how RWD vehicles are set up so that is covered, I also have a live in welder (uncle) so fab work isn't an issue. Some might think this is highly impractical and they're right but it's a great concept that I will pursue. I'm going to hit up Supra forums and try to get more measurements for the drivetrain, etc. If anyone that can help with research it will be appreciated. Anything will help but I could use shifter placement, 3S-GTE width pully to output shaft and Getrag input shaft length. As I pursue this project I will post what I can and if it bombs at least there will be information for any other brave soul that wants to take this on.
|
 |
Replies
|
Mar 17, 2005 - 8:16 PM
|
|
 Enthusiast Joined May 22, '03 From NOVA Currently Offline Reputation: 16 (100%) |
word ok so steering can be relocated thats cool
what are your plans for the drive shaft since it has to be custom? |
|
Mar 18, 2005 - 10:27 AM
|
|
|
Enthusiast Joined Mar 9, '05 From Charlotte Currently Offline Reputation: 0 (0%) |
QUOTE(playr158 @ Mar 17, 2005 - 9:16 PM) word ok so steering can be relocated thats cool what are your plans for the drive shaft since it has to be custom? [right][snapback]258780[/snapback][/right] I wont spend the extra cash to make a C/F driveshaft since they aren't worth it. I will probably just get a standard steel or aluminum cast. I got some buddies at a driveline shop in the next town that can do it. |
Posts in this topic
darksecret RWD Celica Mar 14, 2005 - 5:19 PM
Blakout16 im not gonna flame, but gl... if it goes thru. tha... Mar 14, 2005 - 5:27 PM macavely ok i'm going to say this IT CAN BE DONE .... j... Mar 14, 2005 - 5:47 PM darksecret Im waiting on a post from Curt at the Supra Store ... Mar 14, 2005 - 5:53 PM Coomer The Supra's tranny is pretty big. You will hav... Mar 14, 2005 - 5:56 PM
darksecret QUOTE(Coomer @ Mar 14, 2005 - 6:56 PM)The Sup... Mar 14, 2005 - 8:42 PM Digndoug I would like to see this too, but why not make a r... Mar 14, 2005 - 6:48 PM jgreening QUOTE(Digndoug @ Mar 14, 2005 - 6:48 PM)I wou... Mar 14, 2005 - 7:10 PM Digndoug QUOTE(jgreening @ Mar 14, 2005 - 7:10 PM)QUOT... Mar 14, 2005 - 7:12 PM Coomer You could use the 3S-GTE coupled with an Altezza t... Mar 14, 2005 - 7:22 PM lagos supra parts wont work... the motor and trans are j... Mar 14, 2005 - 7:52 PM darksecret QUOTE(lagos @ Mar 14, 2005 - 8:52 PM)supra pa... Mar 14, 2005 - 8:13 PM darksecret I am getting the idea for this project from the To... Mar 14, 2005 - 8:16 PM playr158 yea i want to do this project eventually good stuf... Mar 14, 2005 - 8:19 PM darksecret What kind of HP and TQ can the Altezza transmissio... Mar 14, 2005 - 8:37 PM darksecret As a note im from charlotte and yes I couldnt pass... Mar 14, 2005 - 8:44 PM orvillescelica I dont think that you will be able to fit the 6 sp... Mar 14, 2005 - 8:49 PM Shigexile man... i was thinking the same, RWD Celica... Well... Mar 14, 2005 - 10:53 PM CheesyLobster I want to see someone actually try this. People sa... Mar 15, 2005 - 12:19 AM Kwanza26 I really really hate these topics... because 90-99... Mar 15, 2005 - 2:39 AM darksecret QUOTE(Kwanza26 @ Mar 15, 2005 - 3:39 AM)I rea... Mar 15, 2005 - 10:02 AM popstar yeah great, but why RWD ?
why not just build yo... Mar 15, 2005 - 3:50 AM playr158 RWD isn't usless for just drifting?
its a grea... Mar 15, 2005 - 7:57 AM Kwanza26 QUOTE(playr158 @ Mar 15, 2005 - 12:57 PM)and ... Mar 15, 2005 - 1:24 PM 4wheelWOnder I agree.....having the only 6gc possibly in the wo... Mar 15, 2005 - 8:29 AM BBoYRuGGeD darksecret you brave brave man(and if u pull this ... Mar 15, 2005 - 10:16 AM thedevilmaycrie hey you have my support ... if you need any help ... Mar 15, 2005 - 10:32 AM darksecret I want everyone to know that I am taking all opini... Mar 15, 2005 - 10:59 AM Coomer Yeah, that's a good point...I almost forgot ab... Mar 15, 2005 - 11:09 AM darksecret QUOTE(Coomer @ Mar 15, 2005 - 12:09 PM)Yeah, ... Mar 15, 2005 - 12:18 PM darksecret Hey Kwanza im 21 and have built or help build 1 95... Mar 15, 2005 - 12:09 PM easternpiro1 Hey dark im ALL THE WAY BEHIND YA MAN!! So... Mar 15, 2005 - 12:30 PM shid Uhh, you keep saying your inspiration is from the ... Mar 15, 2005 - 12:32 PM darksecret QUOTE(shid @ Mar 15, 2005 - 1:32 PM)Uhh, you ... Mar 15, 2005 - 12:51 PM shid QUOTE(darksecret @ Mar 15, 2005 - 5:51 PM)QUO... Mar 15, 2005 - 3:22 PM darksecret Dude, you don't get it do you? I don't giv... Mar 15, 2005 - 4:29 PM darksecret The only problem I believe will be that the Celica... Mar 15, 2005 - 12:58 PM darksecret Kwanza Toyota experience or not cars are not as co... Mar 15, 2005 - 1:57 PM Bigmeanbulldog55 QUOTE(Kwanza26 @ Mar 15, 2005 - 2:39 AM)I rea... Mar 15, 2005 - 2:03 PM darksecret I don't want everyone to give Kwanza a hard ti... Mar 15, 2005 - 2:25 PM darksecret Also Kwanza on the Mid-Engine thing http://www.top... Mar 15, 2005 - 2:33 PM RbrtNdrws sounds fun, if you need any moral support, I'm... Mar 15, 2005 - 3:37 PM thedevilmaycrie i say stop with the flaming ... at least till and ... Mar 15, 2005 - 3:42 PM darksecret As I said before if anyone has a reason why this w... Mar 15, 2005 - 5:01 PM darksecret Im done for today, but tomorrow i'll try to po... Mar 15, 2005 - 5:31 PM nik just a question if your running your axle down tha... Mar 15, 2005 - 6:02 PM darksecret QUOTE(nik @ Mar 15, 2005 - 7:02 PM)just a que... Mar 15, 2005 - 10:01 PM spunky393 More than likely he'll go with a fuel cell. I... Mar 15, 2005 - 6:32 PM darksecret QUOTE(spunky393 @ Mar 15, 2005 - 7:32 PM)More... Mar 15, 2005 - 9:19 PM sphinx QUOTE(OrbitalGT95 @ Mar 15, 2005 - 4:00 PM)Al... Mar 21, 2005 - 6:51 PM OrbitalGT95 All i have to say is that you better drift that f#... Mar 15, 2005 - 7:00 PM playr158 yea i'm really jealous cause when i get most t... Mar 15, 2005 - 7:34 PM defgeph I would like to see this happen, don't let the... Mar 15, 2005 - 8:29 PM darksecret QUOTE(defgeph @ Mar 15, 2005 - 9:29 PM)I woul... Mar 15, 2005 - 9:25 PM darksecret Alright I got off work and went straight to my gar... Mar 15, 2005 - 9:54 PM Kwanza26 So far, everyone has a pretty mundane opinion. Yo... Mar 16, 2005 - 12:32 AM darksecret QUOTE(Kwanza26 @ Mar 16, 2005 - 1:32 AM)So fa... Mar 16, 2005 - 9:49 AM Exile04 hi i just want to wish u luck and a few questions,... Mar 16, 2005 - 6:26 PM darksecret QUOTE(Exile04 @ Mar 16, 2005 - 7:26 PM)hi i j... Mar 17, 2005 - 10:12 AM SlowCelica94 Engines these days pratically swap themselves.
St... Mar 16, 2005 - 8:16 PM darksecret QUOTE(SlowCelica94 @ Mar 16, 2005 - 9:16 PM)E... Mar 17, 2005 - 10:14 AM jayi12-15psi that was more useless than this post Mar 16, 2005 - 8:38 PM madmods I say good luck, and hopefully you achieve this, a... Mar 16, 2005 - 9:00 PM playr158 i'll learn from this i really am interested in... Mar 16, 2005 - 10:13 PM darksecret QUOTE(playr158 @ Mar 16, 2005 - 11:13 PM)i... Mar 17, 2005 - 10:23 AM Jeremy1210 QUOTEEngines these days pratically swap themselves... Mar 17, 2005 - 2:51 AM CheesyLobster QUOTE(Jeremy1210 @ Mar 17, 2005 - 7:51 AM)QUO... Mar 17, 2005 - 3:27 AM SlowCelica94 QUOTE(Jeremy1210 @ Mar 17, 2005 - 7:51 AM)QUO... Mar 17, 2005 - 12:12 PM maikl well we have a rwd subaru sti here in cyprus.... b... Mar 17, 2005 - 3:28 AM shid Linking to a supra "FAQ" about why RWD i... Mar 17, 2005 - 12:16 PM darksecret QUOTE(shid @ Mar 17, 2005 - 1:16 PM)Linking t... Mar 17, 2005 - 2:42 PM shid its not just plain "common sense". the A... Mar 17, 2005 - 5:25 PM darksecret QUOTE(shid @ Mar 17, 2005 - 6:25 PM)its not j... Mar 17, 2005 - 6:16 PM FallenHero custom drive shaft can be had rather easily... A ... Mar 17, 2005 - 10:47 PM darksecret Most people think that the rear end has to be weld... Mar 18, 2005 - 10:37 AM AndyST4 The easiest way to make a rear wheel drive celica ... Mar 19, 2005 - 12:56 AM darksecret QUOTE(AndyST4 @ Mar 19, 2005 - 1:56 AM)The ea... Mar 19, 2005 - 11:46 AM AndyST4 i guess it just depends on how much work you want ... Mar 19, 2005 - 7:09 PM Kwanza26 QUOTE(AndyST4 @ Mar 20, 2005 - 12:09 AM)i gue... Mar 20, 2005 - 2:17 AM AndyST4 QUOTE(Kwanza26 @ Mar 20, 2005 - 2:17 AM)QUOTE... Mar 20, 2005 - 5:17 AM Kwanza26 QUOTE(AndyST4 @ Mar 20, 2005 - 10:17 AM)of co... Mar 20, 2005 - 2:21 PM AndyST4 QUOTE(Kwanza26 @ Mar 20, 2005 - 2:21 PM)QUOTE... Mar 21, 2005 - 2:35 PM 97sccelica QUOTEAnd if you don't think this would be the ... Mar 20, 2005 - 6:44 AM playr158 QUOTE(darksecret @ Mar 18, 2005 - 10:27 AM)QU... Mar 20, 2005 - 3:26 PM darksecret I haven't told anyone about the power levels I... Mar 21, 2005 - 10:15 AM playr158 nice!
keep us updated Mar 21, 2005 - 12:27 PM darksecret Ok for everyone fighting about RWD vs. AWD I have ... Mar 21, 2005 - 5:13 PM |
8 User(s) are reading this topic (8 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 25th, 2025 - 6:08 PM |