![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() Joined Feb 3, '05 From Portland, OR Currently Offline Reputation: 0 (0%) ![]() |
Just wanted to know if any body knows a good place to get custom rotors. Im trying to put some evo calipers on my celica and the back caliper bolts right up to where the rear gt caliper is but i need a little bigger diameter rotor because the pad on the brembos hangs off the rotor a little
|
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) ![]() |
ST205 brakes dont bolt up.
-------------------- |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Dec 27, '03 From Nor Cal Currently Offline Reputation: 0 (0%) ![]() |
QUOTE(Supersprynt @ Mar 20, 2005 - 5:02 PM) ST205 brakes dont bolt up. [right][snapback]259799[/snapback][/right] According to Xpander, the bracket spacing is correct and does match up to the macphearson knuckles, but they are threaded differently, and the knuckles don't come out far enough to fit a large rotor. I'm willing to bet it's the same deal with EVO calipers... Even if the calipers bolted up, the knuckle spacing won't come out far enough to fit a larger rotor. -------------------- "It's ok to be naked girl... I'm an artist!"
1995 AT200 Celica ST: stocked out daily driver... 1984 AE86 Corolla GT-SR5: silvertop 20V 4AGE project car jacked up with goodies... 1991 SW2x MR2 n/a: bare bones hardtop model soon to be... |
![]() ![]() |
Lo-Fi Version | Time is now: February 24th, 2025 - 3:13 AM |