![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Nov 12, '02 From Webster Ma. Currently Offline Reputation: 1 (100%) ![]() |
i want to turbo my 7A-FE can anyone tell me how and what parts are needed. i went to jgstools.com and they had alot of parts listed
but i want the cheapest, best value i can find, so what type of parts would be in this "turbo". i also found sum cheap intercoolers, turbos, and a Bosch bypass valve on ebay(is that a good idea?). oh and do i need a new "turbo back" exhaust system. i relize i will need a new fuel pump too. also for the intercooler piping $299 seems alot for me can't i just got to the hardware store and buy quater inch steel tubing and bend it myself with a pipe bender? -------------------- |
![]() |
![]() |
|
||
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Aug 29, '02 From ny to philly Currently Offline Reputation: 0 (0%) ![]() |
96TurboST has been practically waiting for his car to break down so he can buy a Supra. If he wasn't running 10 psi he wouldn't have those problems. The 7AFE is suited only for MILD boost applications, you can run 7 or 8 psi reliably without upgraded internals. You are right about the ignition/fuel system though, and you will also need a S-AFC to control the fuel/air ratio. The setup should cost you 3.5k or so, but thats good for about 180-200 hp at the crank. |
||
![]() ![]() |
Lo-Fi Version | Time is now: February 26th, 2025 - 3:34 PM |