Radiator Issues! :-[, Keeps burning/losing coolant Options

[JoKeRkId613]

Okay, here's my situation:
1. Blew my OEM radiator(cracked)
2. Temporarily replaced with a Honda radiator
3. Just put in Koyo radiator(looks just like the factory one, just brand new)

-I bought a crap load of coolant.
-First thing I did when all hoses were connected and the car was off(which i think was a mistake...there was no coolant in the radiator at all...it was flushed) was that i poured in coolant until the radiator filled to the top.
-I put the radiator cap on.
-The car hasn't overheated at all.

Currently, I'm running without the radiator cap because I was told I was supposed to have the car on and let it reach a certain temperature before i poured in the coolant. So I'm letting the car take in as much coolant and then refilling so it circulated correctly.

QUESTION:
What shoulda been the proper way to do this from the start? My car still steams every once in a while and it loses coolant a lot and i have to refill. HELP PLEASE!
I have a new thermostat, perhaps I should change it? How is this done...anyone got pics?

[Batman722]

fill to the top and put the radiator cap on. Run the car for 5 min (until warm) then check the puke tank to see if it needs more coolant. Add more coolant into the system using the puke tank. Make sure you burp the hoses to free trapped air.

coolant capacity for ST 1.8
M/T....6.4 QTS (6.1L)
A/T....7.0 QTS (6.6L)

dumb question time...
is there coolant on the ground (leaking from a hose or anything) ?

[JoKeRkId613]

Ok, thanks for the feedback. What's a puke tank? Is it the little white container to the right of it? It says "Low" and "Full"? How do I know if it needs more coolant? It has to be on full? I can't put more than that, right? Should I replace the thermostat? How do I? Thanks!