![]() |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Jun 4, '04 From Northern New Jersey Currently Offline Reputation: 2 (100%) ![]() |
hey guys... someone please enlighten me!!! say i was gunna do the camry v6/solara tranny swap... i know i need the all-trac axles and the mr2t axles correct? my question is which all-trac axle CAN i use? st165, st185, or st205 axles??? or are they all the same???
![]() ![]() BBoY -------------------- ![]() ..(formerly daily driven) 3S-GTE powered celica currently set @ 12psi.. |
![]() |
![]() |
|
![]() Enthusiast ![]() ![]() ![]() ![]() ![]() Joined Feb 10, '03 From Connecticut Currently Offline Reputation: 11 (100%) ![]() |
You need hybrid axles no matter what. You can use St205 outta 1/2 shafts and MR2 inners or Solara inners, depending on what tranny.
-------------------- |
![]() |
|
Enthusiast ![]() Joined Mar 21, '04 From Oceanside Currently Offline Reputation: 2 (100%) ![]() |
QUOTE(Supersprynt @ Mar 28, 2005 - 3:32 PM) You need hybrid axles no matter what. You can use St205 outta 1/2 shafts and MR2 inners or Solara inners, depending on what tranny. [right][snapback]263127[/snapback][/right] I had the ST205 axles and actually would not work for my swap with the MR2 Tranny. The reason is the newer axles don't have the hex screws that allow the two different types to bolt up. Because the shaft sizes are different, I don't believe you can do anything else to try and adjust the two to combine. I ended up using 185's with the MR2, but am still killing them. I have gone through two now, and after talking to a few people think it is because I also have to use the Hubs from the ST205. |
![]() ![]() |
Lo-Fi Version | Time is now: April 23rd, 2025 - 1:12 AM |