 Pulling An Engine - Quick Question(Pic Inside) |
 Apr 8, 2005 - 6:37 PM
|
 
|
 Administrator  Joined Aug 23, '02 From Seattle, WA Currently Offline Reputation: 14 (100%)  |
Tonight or tomorrow I'm going to try to get a hoist from a friend for the weekend and attempt to pull my engine to the point where it will move around so that I can get the rear mount in.
To do this, I need the engine to be free of all the mounts so it can twist just a bit. Now here's my question. First I'll show the pic. Can I simply attach chains to those two brackets to support the engine and move it around a bit while I get the mount in?
Attached image(s)
-------------------- New Toyota project coming soon...
|
 |
Replies
|
Apr 10, 2005 - 2:44 PM
|
|
|
Enthusiast Joined Dec 2, '03 From Virginia Currently Offline Reputation: 0 (0%) |
You might be able to get away with just removing the front mount and swinging the engine forward enought to take out the rear. I seem to remember I didn't remove the two side mounts to remove the crossmember and oil pan. But do support the engine with a hoist, and don't be an idiot like me and lift the front of the car up with the hoist
|
Posts in this topic
Coomer Pulling An Engine - Quick Question(Pic Inside) Apr 8, 2005 - 6:37 PM
orvillescelica im 75% sure that you just use the two engine hange... Apr 8, 2005 - 6:45 PM macavely u could use those... but those can also bend if so... Apr 8, 2005 - 6:47 PM lagos coomer, yes those are the 2 hooks for taking an en... Apr 8, 2005 - 7:14 PM Kwanza26 Yes... what lagos said. They're specifically ... Apr 8, 2005 - 8:12 PM Coomer The horizontal crossmember on my car can't go ... Apr 8, 2005 - 10:11 PM Hanyo good luck Coomer Apr 8, 2005 - 11:17 PM MonsterBOX damn ur doing all this yourself? dont drop the eng... Apr 9, 2005 - 3:02 PM
 |
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: February 21st, 2025 - 4:25 PM |