Reinforcing the invader front lip and front bumper, what works? Options

[prez]

so this was my plan...

get the front bumper fitted good, and holes drilled etc, then adding some fiberglass to the inside to make it a little stronger, maybe taking some chicken wire up in the whole inside of the piece, puddying it to the bumper and fiberglassing over in parts, this way holding to piece togehter a bit and giving it a little support while allowing it to have a slight bit of flexibility when putting it on the car...

now to the lip...

as probably every single person here knows, the vader front lip will split in have if you hit a squirrel with it... i was thinking to reinforce it i could put a piece of fiberglassed wood against the front, then fiberglass over it to bond it to the lip. after id include some wood screws hidden, going through the bottom, along with a little more fiberglass on the outside with some extra layers of clear coat after i paint of course...


any good ideas to make this piece stronger?

This post has been edited by prez: Apr 13, 2005 - 9:37 PM

[BBoYRuGGeD]

"the vader front lip will split in have if you hit a squirrel with it"

hahahah thats funny... but lemme just say something tho. You dont really need to reinforce anything. The kit will hold assuming its a 7 layer fiberclass kit. We (Me, Jubz, Mac) actually ran over the invader lip with Jubz' white celi. TWICE (since jubz backed up on it again after he ran it over...hahah)!!! It was purely by accident but the lip held with only some cracks here and there. so im pretty sure the lip will win against a squirrel And there was another situation where, in trying to jack up my car, my entire front invader bumper held up the front end of my car. dont ask me how that happened it was pure stupidity on my part. but the kit had no damage AT ALL. i even took it off and inspected it. crazy stuff these fiberglass ya know?

BBoY