power window module, aftermarket Options

[Hanyo]

you know those modules that roll up the window when you arm you car.

Well this unit i have is a universal one, It will vent the windows if you give it negative signal burst.

In order for it to roll the windows completely down i would need to have the negative signal continiously.

so how would i go about doing this? i want to hook it up to my negative triger lock signal from the alarm. so it will roll up the windows when i arm the car. but i run into the problem of the windows just rolling up an inch each time. the negative lock for the car alarm is not long enough to let the windows roll up all the way.. I would look silly pushing the arm button 6-7 times to roll up all the windows completely.


so how am i gonna do this?

[chicklover345]

in order to use the remote you have to have a free aux. you have to connect one module wire to the armed output and another to the aux output. on mine i can roll the windows down 2 inches then 2 again until it goes all the way down when the alarm is armed when its not it goes all the way down. it only rolls up when i arm it.