7agte build diary, my progress so far Options

[nik]

Feb 25 2005

recieved
intake manifold w/ throttle body (small port)
stock cams gears (small port)
oem FPR
fuel rail (big port)

(( from Bee aka kwanza ))

big port head from a 4agze ebay

Feb 28 2005

i drop the head off at F-Tuning (local shop) to get the head pressure checked if good the head will get fully tuned new valve spring P&P etc.

sent money off to a MR2 member for a
AE101 LEVIN MAP/DLI 4AGZE 1992+ MAP/DLI engine wiring harness

also bought 440 cc 7mgte injectors
4ag AEM adjustable cam gears
talking to frotou about a custom manifold

Need to talk to the shop about what cams to use i'm thinking 256 intake 243 exhaust

March 1 2005

things a need to do
track down DLI coils and distributor
track down a 92+ levin Map ecu ( any help on this one will be a big help)

This post has been edited by nik: Mar 11, 2005 - 12:39 PM

[playr158]

i was considering an 83mm bore on my 7afte when i go into that project
but i think with 12psi that would be cutting the walls too thin...........i think an 82mm would be sufficient w/o sleeving