LED Windshield Nozel Wiring, Id like to change it to turn signal Options

[red94celicagt]

Hey, i installed two red LED windshield nozels on my car and have the grounds going to a bolt in the engine compartment and the other power wires to the low-beam fuses so that the LEDs turn on when i turn on my headlights. This set up is alright for me for now, but eventually i would like to hook the power wire form the LEDs to the turn signal power wire, so that when i have my headlights on the LEDs remain on, but when i engage the turn signal left, left goes on and the right goes on with the right. I was wondering if this would work if i found the wire to the daylight driving lights (yellow ones on bumper) and connected them to the respective side, because when my headlights are on, so are those AND when you engage the turn signal, the corresponding side blinks. Assuming this to be correct, wouldnt the LEDs blink with the bumper lights? also if this would be true, where would i find the wires for the bumper lights? thanks again!

[cyb593]

my point is there is 2 blinkers if he wants the right led one to blink when he is making a right hand turn thats fine but it wont work for the left cause the set of wires(positive and negative) are wired to the right hand side blinker. meaning there is one set of wires which on mine is positive and negative it is not impossible to do that maybe if u bought 2 pairs and only used one light from each one and wired one of them to ur right blinker and one to the left blinker then it would work. meaning u have to have 2 sets of wire