7agte build diary, my progress so far Options

[nik]

Feb 25 2005

recieved
intake manifold w/ throttle body (small port)
stock cams gears (small port)
oem FPR
fuel rail (big port)

(( from Bee aka kwanza ))

big port head from a 4agze ebay

Feb 28 2005

i drop the head off at F-Tuning (local shop) to get the head pressure checked if good the head will get fully tuned new valve spring P&P etc.

sent money off to a MR2 member for a
AE101 LEVIN MAP/DLI 4AGZE 1992+ MAP/DLI engine wiring harness

also bought 440 cc 7mgte injectors
4ag AEM adjustable cam gears
talking to frotou about a custom manifold

Need to talk to the shop about what cams to use i'm thinking 256 intake 243 exhaust

March 1 2005

things a need to do
track down DLI coils and distributor
track down a 92+ levin Map ecu ( any help on this one will be a big help)

This post has been edited by nik: Mar 11, 2005 - 12:39 PM

[nik]

sorry guys right after i posted those rod pics i left for a little vaction but im back now

So I have seen the megasquirt guys using the dual coil set up with the EDIS.  I've also seen one blacktop guy run four individual coils.  That would be nice, I am sure, but how much equipment would be needed?

>heads to club 4ag for tech info
[right][snapback]293065[/snapback][/right]

Yeah with the SDS system i'm running 4 coils

Nik, have you tried lining the B series manifold up the an FE head? I know the GE and FE heads are a little different, will what you did with the manifold work on the FE heads as well?

By the way I have a silvertop here that's going into an AE92 and will be running megasquirt with EDIS ignition, if you guys are interested I'll keep you updated as the project starts.

-Doc
[right][snapback]293157[/snapback][/right]

i dont know it should be work i bought the manifold and flange and lined them up it was 98% there so cut off the oval section and weld and bam new header

NIK WHERE ARE YA!!!!!!!!!!!!!

YOU GOT PM!!!!!!!!!!!!
[right][snapback]293306[/snapback][/right]

I PM YOU BACK!!!!!!