6G Celicas Forums

Welcome Guest ( Log In | Register )

> Cruise Control, Is it possible to add?
post Jun 3, 2005 - 12:51 AM
+Quote Post
MK153



Enthusiast
*
Joined Apr 13, '04
From St. Louis (Webster Groves)
Currently Offline

Reputation: 0 (0%)




Is it possible to easily add cruise control to my 94 ST?

That pretty much wraps it up...

Anyone know if they even make cruise for the 7AFE? Would this be something that easily would be added?

Thanks,

Todd


--------------------
 
Start new topic
Replies
post Jun 3, 2005 - 10:02 PM
+Quote Post
97GTinKC

Enthusiast
***
Joined Aug 31, '02
From KC
Currently Offline

Reputation: 0 (0%)




Yes, it can be added fairly easily, I put cruise in my mothers 2000 Protege last summer, about 3-4 hours work. Whats involved would be mounting the servo unit to pull the gas pedal, mounting the control stalk, tapping into the vehicle speed sensor wire, and tapping into the brake light switch wires, + power and ground. I mounted the servo on the rt front shock tower and ran the cable in thru the firewall and clamped it under the dash so it pulls on the stock gas pedal where the throttle cable hooks up. tapped into the speed sensor at the trans and to the brake lights at the brake light switch on the brake pedal. kind of hard to get to some of those locations, but doable for anyone with a few tools. total cost for an electronic cruise system should be around 125-150 for a decent one. not quite as nice as factory, but it works fine.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: November 28th, 2024 - 6:19 AM