Cutting Springs, Dropzone not enough!! Options

[6gc_driven]

hey everybody,
i put some 18'' rims on my car and bought some dropzone springs and installed them hoping that it will drop my car at least 2", but that didnt happen. My car did drop, but only about 1.5 inches, which isnt what i wanted. The car looks "ok" the way it is, but a lil more drop will make a big difference. So i was wandering, will cutting the dropzone spring just a lil bit make a big difference on how the car rides (will it bounce too much or do any weird things)????(sorry if thats a dumb question)

I just dont want to trash those springs and have to buy some other lowering springs, or even some crappy coilovers (which will not give me a good ride when driving)

[Hanyo]

chopping springs are for honda dudes. go get some coilovers and some koni yellow adjustabe struts and basically switch the coilover spring rate to about 250-300 in the front cuz they come with around 600 all around and that's why it's so bouny. and about 200-250 in the rear and you'll be set. it's just like having a full coilver setup...ya the real kind!!
[right][snapback]295244[/snapback][/right]

he has coil overs..

have you tried just using the springs and not the sleeve and rings?

your last resort should be cutting the coils.