Considering a Swap, Few Questions (Swappers Help Please) Options

[Bigmeanbulldog55]

I'm finally considering a swap. I'm a lot more interested in rally and autoX racing than drag. If I do the swap, I'd like to do the AWD set up some time in the future, but not right away. One of my questions is, can I have a 3sgte with a reliable 300hp? Another is, were can I get a good clip? Third is, do I have to get parts from the dealer everytime something breaks, or would it be okay for me use mr2 parts on a JDM 3sgte. Thanks for the input everyone.

EDIT: Just to clear a little bit up. I know what it's going to detail to do the awd set up. I've been a member for a good bit and I've done a fare amount of research. I'm also most likely going with stand-alone engine management, but this might not be right away. The questions that I've asked aren't talked about very much, or at all. I could be wrong on that though, it might be that I'm just not searching correctly.

This post has been edited by Bigmeanbulldog55: Jun 9, 2005 - 3:02 PM

[Sev408]

awd im not getting into...

300hp to the wheels is reliable and very possible. you will need to upgrade the stock ct26 to probably a t3, bigger injectors? and im not quite sure what else.

good clips, jarco seems to be the most popular.
since your in west virginia look up noyanusa.com, im sure they can import a 3s for you and they are located here in manasa VA, about 45 minutes south of DC.

dealer is an option, so are mr2 parts, im sure even advance auto can get you parts that would appear on a 5s.