Considering a Swap, Few Questions (Swappers Help Please) Options

[Bigmeanbulldog55]

I'm finally considering a swap. I'm a lot more interested in rally and autoX racing than drag. If I do the swap, I'd like to do the AWD set up some time in the future, but not right away. One of my questions is, can I have a 3sgte with a reliable 300hp? Another is, were can I get a good clip? Third is, do I have to get parts from the dealer everytime something breaks, or would it be okay for me use mr2 parts on a JDM 3sgte. Thanks for the input everyone.

EDIT: Just to clear a little bit up. I know what it's going to detail to do the awd set up. I've been a member for a good bit and I've done a fare amount of research. I'm also most likely going with stand-alone engine management, but this might not be right away. The questions that I've asked aren't talked about very much, or at all. I could be wrong on that though, it might be that I'm just not searching correctly.

This post has been edited by Bigmeanbulldog55: Jun 9, 2005 - 3:02 PM

[jgreening]

I'm finally considering a swap.  I'm a lot more interested in rally and autoX racing than drag.  If I do the swap, I'd like to do the AWD set up some time in the future, but not right away.  One of my questions is, can I have a 3sgte with a reliable 300hp? 
[right][snapback]296717[/snapback][/right]

Yes

Another is, were can I get a good clip?
[right][snapback]296717[/snapback][/right]

Look at the sticky.

Third is, do I have to get parts from the dealer everytime something breaks, or would it be okay for me use mr2 parts on a JDM 3sgte.
[right][snapback]296717[/snapback][/right]

Most Mr2 parts are the same.