Considering a Swap, Few Questions (Swappers Help Please) |
Considering a Swap, Few Questions (Swappers Help Please) |
Jun 9, 2005 - 1:22 AM |
|
Enthusiast Joined Jun 1, '03 From WV Currently Offline Reputation: 2 (100%) |
I'm finally considering a swap. I'm a lot more interested in rally and autoX racing than drag. If I do the swap, I'd like to do the AWD set up some time in the future, but not right away. One of my questions is, can I have a 3sgte with a reliable 300hp? Another is, were can I get a good clip? Third is, do I have to get parts from the dealer everytime something breaks, or would it be okay for me use mr2 parts on a JDM 3sgte. Thanks for the input everyone.
EDIT: Just to clear a little bit up. I know what it's going to detail to do the awd set up. I've been a member for a good bit and I've done a fare amount of research. I'm also most likely going with stand-alone engine management, but this might not be right away. The questions that I've asked aren't talked about very much, or at all. I could be wrong on that though, it might be that I'm just not searching correctly. This post has been edited by Bigmeanbulldog55: Jun 9, 2005 - 3:02 PM -------------------- Live Free, Be Happy
|
Jun 9, 2005 - 4:34 PM |
|
Enthusiast Joined Jun 1, '03 From WV Currently Offline Reputation: 2 (100%) |
QUOTE(jgreening @ Jun 9, 2005 - 5:08 PM) QUOTE(Bigmeanbulldog55 @ Jun 9, 2005 - 2:59 PM) jgreening, I do appreciate you input on this stuff. Some of the things you've said are helpful. However, I'm not new to modifieing cars. I know that modification decreases reliability, but I wanted to know how far is to far and what I could expect. Please don't talk to me like I'm new to cars. If you do, others will follow, and pretty soon that's all this particular post will be. If I could get opinions from other people how have done swaps, that would be very helpful and greatly appreciated. [right][snapback]296935[/snapback][/right] Did my post sound like I was demeaning you? I didn't intend it that way. In any event, the information I posted in my response is much more prudent than the other answers you got. To suggest that 700 h.p. is the limit on the 3sgte to a person that is concerned about reliability is misleading. 700 h.p. is approaching the limit of a stroked 3sgte with ALL the bells and whistles. Reliability and that motor, even when built by the best builders, are two words that should not be spoken in the same sentence (assuming its going to be pushed that hard). If you are ultra-concerned about reliability, buy a gen 3 and leave it stock except for intake, exhaust and boost controller. That should be over 300hp at the flywheel and VERY reliable. Hope that helps. [right][snapback]296961[/snapback][/right] Your previous post could have been perceived as demeaning, especially for the new members and well, jerks on here. Sometimes it seems like they just wait for someone to start with a little negative comment and then just jump in with the stupid comments. In any means, I do appreciate your help and the fact that you've posted a few times here shows your concern for truthful information. As for someone suggesting 700 reliable horsepower, he sounded like he did some research and was mostly talking about maximizing I think, but it's why I like when several people post. Just as a reminder to everyone, thanks for all your help and please keep the information coming. This post has been edited by Bigmeanbulldog55: Jun 9, 2005 - 4:37 PM -------------------- Live Free, Be Happy
|
Jun 9, 2005 - 5:20 PM |
|
Enthusiast Joined Jan 17, '04 From Illinois Currently Offline Reputation: 0 (0%) |
QUOTE(Bigmeanbulldog55 @ Jun 9, 2005 - 4:34 PM) Your previous post could have been precieved as demeaning, especially for the new members and well, jerks on here. I didn't know big mean bull dogs were so sensitive....just playing. Actually, its very hard to convey tone over a written message. When you review your question and my post, I think you will understand where I was coming from. Your question asked about "everyday reliability". Now, no offense, but I don't know what that means. So, I asked: "Stock-like reliability"? And, the tone inside my head was quite pleasant, I assure you. As for you not being new to the world of modifying cars, I don't recall saying or even implying that. I simply answered your question regarding the 3sgte based upon the research I have done. One more thing. Your post implies that you only want to hear from folks who have done the swap themselves. As I have stated on numerous occassions in the past, opinions from guys like Super and Lagos are often times much more valuable than mine because of this very reason. However, I am a methodical researcher. Please understand that I only post when I know what I am talking about. -------------------- QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback] i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this. |
Lo-Fi Version | Time is now: December 3rd, 2024 - 5:27 PM |