--"Help Wiring my subs?"--, Help needed! Options

[CanadaCelica]

Hi everyone, I know this gets posted allot so I will be straight forward and give you all my information and what I require.

I just purchased today a nice pair of subs, or so I think...lol,
Well this is what I got:

2 10" Infinity 1030w subs 250w RMS and 1000 MAX
1 MTX MXA6001 class D mono amp to power them 300RMS @ 4Ohms, 600RMS @ 2Ohms
There in a sealed box by the way

This is what I would like to know:
1) What gauge wire should I use to hook from the subs to the amp?
2) What gauge wire I should use for the remote turn on?
3) Where is a good place to ground the amp?
4) What would be a good RCA cable to use? Should it have features like twisted or super shielded...lol...I duno just giving examples to help better answer my question.
5) Since the subs are only 250RMS would it be better for me to wire them in 4Ohm, or 2Ohm based on what the amp provides.
6) What style fuse should I use, AGU or ANL? And what AMP rating?
7) Last if anyone can give me some ideas on how I should run my wiring across the celi, through the center console, or side panels? Id be happy

If anyone could help me with these many but hopefully simple to answer questions that would be awesome. I am a newbie at this but I enjoy a challenge.

[BLINKYxMUNKEY]

one thing i found easy was to buy the amp wiring kit at walmart, and also get 14 gauge wire for the subs. it cost total like 30 bucks and had everything i need. a good ground for me was a my seat belt were it bolted down.

This post has been edited by BLINKYxMUNKEY: Jun 21, 2005 - 10:16 PM