 Edo's Celica DYNO TUNE., Gained some horses :D |
 Jun 23, 2005 - 7:08 PM
|
 
|
 Enthusiast  Joined Oct 28, '02 From Europe, Lithuania Currently Offline Reputation: 8 (100%)  |
Well, the wednesday here for me was the Dyno day... The first day i got Edos car, after i drove her home, i was like holy damn..... this thing is slow as hell..... So to figure out what the heck was wrong with his car, i promised Edo to go on Dyno..
So.... Just to start of everything, who aint know his car here are the main things that are done to it: 1.8 7AFE Bored out to 82 mm Arias Pistons from GZE CR is rised to 11.02 Head full prot and polish 3 angle valve job Rods, pistons, crank balanced lightned Custom build exhaust with resonator and rear muffler only (loud mofo  )Custom build CAI with Apex'i Power Intake filter and Cold air box. Fule perssure regulator. And Emanage with the Ignition and Injectors wirings. So, the first run was just to check the condition of the car with hooked up Wide band. 4 gear - till the top (6200 rpm) and we got flames (about 1 meter long!) flying out of his exhaust and wide band going crazy cuz of the RICH mixture..... First run: 110 hp and 152nm TQ at the crank..... Bad bad bad....... Well, second run - fuel pressure droped from 60 PSI on WOT till 50 PSI, and ignition advance at +2. 120 hp and 160nm of TQ better but still not good..... After this Emanage tuning has been done, air flow map was adjusted a bit, and ignition map was changet at +4 in all the RPM range.. Third run: 124 hp and 164nm of TQ......... another test of ignition at +6...... gave the best result: 127 hp and 166nm of TQ.... here is the Dyno sheet. 1 and second run curves..... You can see how much we gained in some places..... And i can say - now this thing flyes (comparing to ST's celicas ) yes, it has the power in practicly all the rance and pretty rev happy, cuz you can go all the way till 6500 and listen to this mean deep sound    later (sunday maybe) i will put a 2 video files and LOTS of pics from Groundzero performance shop, cuz they had lots of goddies laying around As for now this is all i have
-------------------- Ex celica owner - just a guy from other side of the pond...
Full custom Projects from restoration to performance builds <<<<<< DCw / JDMart >>>>>>> |
 |
Replies
|
Jul 3, 2005 - 3:53 AM
|
|
|
Enthusiast Joined Apr 25, '03 From Miami, FL Currently Offline Reputation: 9 (100%) |
still dont get it. lol. so whats the hp when everything is working correctly? with a perfect mixture and all that.
--------------------  |
Posts in this topic
doGGy Edo's Celica DYNO TUNE. Jun 23, 2005 - 7:08 PM
x_itchy_b_x Awesome to see an ST put out nice numbers Jun 23, 2005 - 7:15 PM doGGy Still Edos car is missing 10-15 hp and about 25nm ... Jun 23, 2005 - 7:21 PM
Kwanza26 QUOTE(doGGy @ Jun 24, 2005 - 12:21 AM)Still E... Jun 24, 2005 - 1:57 AM presure2 not bad doggy, what all that cost ya? or him i sho... Jun 23, 2005 - 9:22 PM lagos crap Jun 23, 2005 - 9:35 PM tim86 QUOTE(lagos @ Jun 24, 2005 - 2:35 AM)crap
[sn... Jun 24, 2005 - 1:18 AM edo17982 QUOTE(lagos @ Jun 24, 2005 - 4:35 AM)crap
[sn... Jun 24, 2005 - 9:49 AM FAQdaWorld Yeah, i dont get it? Jun 24, 2005 - 12:10 AM FallenHero How is the car running with the 11:1 comp ratio? Jun 24, 2005 - 12:15 AM doGGy Edo messured both cams i think, i will ask him for... Jun 24, 2005 - 3:24 AM edo17982 Ok guys I'm at work now so I just write fast t... Jun 24, 2005 - 4:40 AM Kwanza26 QUOTE(edo17982 @ Jun 24, 2005 - 9:40 AM)Exhau... Jun 24, 2005 - 4:32 PM edo17982 QUOTE(Kwanza26 @ Jun 24, 2005 - 11:32 PM)QUOT... Jun 24, 2005 - 5:05 PM nik good looking numbers edo Jun 24, 2005 - 9:07 AM edo17982 well yes and no....I mean....now temperature is hi... Jun 24, 2005 - 9:34 AM BlackSTX I think that's a lot bigger gain than even you... Jun 24, 2005 - 9:49 AM edo17982 QUOTE(BlackSTX @ Jun 24, 2005 - 4:49 PM)I thi... Jun 24, 2005 - 9:51 AM BlackSTX Oh yeah he does say its at the crank. Jun 24, 2005 - 10:15 AM FallenHero How did he measure crank hp?
So this is with a st... Jun 24, 2005 - 1:52 PM dustin15brown How much money have you put into this for the extr... Jun 25, 2005 - 9:58 AM FallenHero more along the lines of 35hp. And I still want to... Jun 25, 2005 - 1:44 PM doGGy The HP numbers are at the crank, if you look at th... Jun 26, 2005 - 2:25 PM CelicaST18 couldn't you just have a shop regrind the stoc... Jun 25, 2005 - 1:51 PM MonsterBOX with those pistons and that engine build you could... Jun 25, 2005 - 2:03 PM FallenHero ok, so what is the hp at the wheels then? 128-18=... Jun 26, 2005 - 2:49 PM doGGy Guess yea
QUOTE(FallenHero @ Jun 26, 2005 ... Jun 26, 2005 - 2:53 PM dustin15brown so about 20-25 hp gain right? How much total went ... Jun 26, 2005 - 3:54 PM edo17982 let's say that:
Pistons 400€
Head job (full) ... Jun 26, 2005 - 4:03 PM FallenHero Wow, I love ya man, but it's time to let the 7... Jun 27, 2005 - 4:30 PM MonsterBOX i dont understand why youd would go through all th... Jun 27, 2005 - 4:33 PM doGGy Get more out of the exact setup like this - and yo... Jun 27, 2005 - 5:35 PM edo17982 QUOTE(doGGy @ Jun 28, 2005 - 12:35 AM)Get mor... Jun 27, 2005 - 8:25 PM MonsterBOX QUOTE(doGGy @ Jun 27, 2005 - 5:35 PM)Get more... Jun 28, 2005 - 12:17 AM doGGy Yes, it was, but if you have 11.02 CR under your h... Jun 28, 2005 - 12:42 AM FallenHero He was building for boost, but the compression did... Jun 27, 2005 - 5:37 PM FallenHero QUOTE(FallenHero @ Jun 27, 2005 - 3:37 PM)He ... Jun 28, 2005 - 12:37 AM FallenHero agreed, this car has like.. 110 whp. Basically st... Jun 28, 2005 - 1:31 AM MonsterBOX yea but all the head work he did switching now wou... Jun 29, 2005 - 12:00 AM FallenHero which is why I'd slap on a high quality thick ... Jun 29, 2005 - 1:15 AM doGGy I told the same to Edo, he should get HKS 2 mm 6 l... Jun 29, 2005 - 4:22 AM FallenHero QUOTE(doGGy @ Jun 29, 2005 - 2:22 AM)I told t... Jun 29, 2005 - 11:33 AM playr158 don't use a think head gasket it will blow
ED... Jun 29, 2005 - 11:36 AM FallenHero QUOTE(playr158 @ Jun 29, 2005 - 9:36 AM)don... Jun 29, 2005 - 11:50 AM playr158 true true
but considering stock cr is like 9.5:1 ... Jun 29, 2005 - 12:42 PM doGGy Playr, you aint reading again....... He is at 11.0... Jun 29, 2005 - 3:43 PM FallenHero in all honesty, 7th gen celicas boost safely to ov... Jun 29, 2005 - 2:49 PM doGGy Not only tuning..... Higher CR means higher Octane... Jun 29, 2005 - 3:44 PM FallenHero oh, I agree, but that doesn't change the fact ... Jun 29, 2005 - 5:54 PM playr158 so are we back to the forget custom pistons and us... Jun 30, 2005 - 8:42 AM FallenHero no, the custom pistons would be better, but they c... Jun 30, 2005 - 12:16 PM JoKeRkId613 i dont get it... in the first run, it says hp is 1... Jul 2, 2005 - 4:30 AM edo17982 QUOTE(JoKeRkId613 @ Jul 2, 2005 - 11:30 AM)i ... Jul 3, 2005 - 2:23 AM OOBE They come with that to the crank, which is like 8x... Jul 2, 2005 - 6:19 PM Hanyo QUOTE(JoKeRkId613 @ Jul 3, 2005 - 1:53 AM)sti... Jul 3, 2005 - 8:06 AM nik edo sell the head and come to the dark side (7age ... Jul 5, 2005 - 6:11 PM edo17982 Well nick I'm gonna come to gark side but stil... Jul 6, 2005 - 5:54 AM FallenHero for sake of easiness, I'd just get a thicker h... Jul 6, 2005 - 2:13 PM nik QUOTE(FallenHero @ Jul 6, 2005 - 12:13 PM)for... Jul 6, 2005 - 4:36 PM JoKeRkId613 127? thats nothing... for buying gze pistons and a... Jul 6, 2005 - 4:44 PM edo17982 QUOTE(JoKeRkId613 @ Jul 6, 2005 - 11:44 PM)12... Jul 6, 2005 - 4:53 PM Hanyo QUOTE(JoKeRkId613 @ Jul 6, 2005 - 2:44 PM)127... Jul 7, 2005 - 11:35 PM doGGy Exactly, in some areas he is gaining about +25Hp, ... Jul 8, 2005 - 12:16 AM |
9 User(s) are reading this topic (9 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: November 24th, 2024 - 12:02 PM |