94' Celica ST / 3S-GTE swap, I got the car with the motor half assd.. Options

[celicast3sgte]

OK so i bought this car off ebay for 2grand, its got 80k miles, nice interior ****ty seats, came from miami, FL. I got it with an unfinished 3sgte swap, heres what i got then ill list what i know im missing. I got shift linkage and shifter in place in the car, I got the clutch master cylinder and the holes tapped for it, i also have the bracket that holds the clutch pedal (this car was an auto) I need to find the clutch pedal assembly and hydraulic lines. I got the motor with the all-trac tranny and it arrived in the car by only the driver and passenger side motor mounts (bad weld jobs too i need to redo them) so its the AWD tranny with the transfer case removed and a blocking plate installed (i heard rumors I loose power this way? if so i will get an Mr2 tranny in its place) now i have one new axle for the alltrac tranny but only the one so if i keep the alltrac setup i need the second and if i go mr2 i need a new set. Also i need diagrams and a place to buy the wire harness for my car. Also I need a radiator since the bottom hose for my car was on the opposite side of the 3sgte, so will an alltrac or gt-4 radiator work? Thats all I can come up with for now im really tired. Any help is appreciated, I need this car asap.

[Rjb23]

Get the mr2 tranny not the gt. All you need to mount it is to change the shift linkage around, and the st205 motor mounts, and I think the st205 shift cables, do a search on here there was a post with information on what you need to make it work. Look for info posted by Sphinx he has the e153 tranny and he listed all the parts you need.