3SGTE Wiring Question, The Mystery of the missing "FC" wire |
3SGTE Wiring Question, The Mystery of the missing "FC" wire |
Aug 2, 2005 - 11:02 PM |
|
Enthusiast Joined Mar 31, '04 From Summerville, SC Currently Offline Reputation: 5 (100%) |
Here is the pinout of the '92 Celica Alltrac (USDM). The bottom of the image is a copy of the top with the differences in the JDM ECU that I have. I am trying to locate the "FC" (fuel cut) wire. Anyone have any suggestions?
Could it be the violet, yellow-green, or red-yellow wire? -------------------- -Dr Tweak, 6GC's resident engine swap wiring expert extraordinaire Click here to see my swaps drtweak@phoenixtuning.com |
Aug 4, 2005 - 1:14 PM |
|
Enthusiast Joined Aug 31, '02 From Philadelphia, PA Currently Offline Reputation: 8 (100%) |
if you wire it to where i told you, you should be just fine..... because the first 2 plugs of the ecu shouldnt need to be modified at all
i still didnt doubble check my books, but if its the green wire, pin4 on the COR, then just just wire it to the male IG2 plug pin5. then the female end of that plug will route it to whatever pin on the ecu it eventually ends up going to -------------------- 15PSI - 30MPG - Megasquirt Tuned
|
Lo-Fi Version | Time is now: November 24th, 2024 - 3:25 PM |