DELETE Options

[playr158]

Chico Race Works is offering this High Quality Stainless Steel Catch can at a special group rate. Normal price from www.chicoraceworks.com is $60 shipped for the full kit. It includes the stainless can, 15mm inlet and outlet fittings, clear site tube to keep an eye on the accumulated oil level, 3.5 feet of 15mm black oil rated hose, (4) hose clamps, and (1) universal mounting bracket.

This kit can be compared to cans such as GReddy's ($90+ shipped), and is correctly sized for the 7afe at 9mm inlet/outlet, unlike many of the knock off cans you see floating around for sale.

Correct sizing is very important, as undersized lines can cause built up crankcase pressure that can blow seals such as the turbo oil seals, or in the least damaging case cause your dipstick to pop out spraying oil everywhere and causing a mess.
Please see pics below for a picture of can


if i can get around 5 people the cost will be like 50$ for the full kit
or 35$ for just the can!

This post has been edited by playr158: Aug 23, 2005 - 10:43 AM

[playr158]

yes this is a MUST from an N/A to turbo conversion and alot of tracks require you have them.....

whats so good about it?
it sends oil that is released from your valve cover(from pressure) into the tank then the gasses back into the intake.....
where as without it you could potetially send oil straight into the intake and back into the cylinders creating smoke and power loss......