6G Celicas Forums

Welcome Guest ( Log In | Register )

> Sneek peek at new wheels and spacers, The first step in Exterior 2.0
post Aug 17, 2005 - 2:12 PM
+Quote Post
jgreening

Enthusiast
*****
Joined Jan 17, '04
From Illinois
Currently Offline

Reputation: 0 (0%)




Well folks, I spent about 6 hours getting my front spacers and new wheels on. To celibrate, I thought I would show you a sneak peak at the results. Notice how far the wheel is sitting out. They are 17" x 7.5", 48 offset with 15mm spacers. As far as the exterior position, its comparable to a 27 offset on a 7" rim. Enjoy.

user posted image


--------------------
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]

i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.
 
Start new topic
Replies
post Aug 19, 2005 - 2:14 PM
+Quote Post
jgreening

Enthusiast
*****
Joined Jan 17, '04
From Illinois
Currently Offline

Reputation: 0 (0%)




Thanks for the comments guys. I got all four Wheels on and I am very pleased. Also, I must report that the Avon tires are very nice. A little softer (better grip) than the conti extreme contacts I had. The sidewall stiffness is the same.

The full Exterior 2.0 is very close. I just have to get my turns from Doggy and the conversion will take place. I am starting to see the light at the end of the tunnel. biggrin.gif


--------------------
QUOTE(lagos @ Jul 10, 2006 - 1:55 PM) [snapback]454118[/snapback]

i know your trying to do the right thing for your motor, but this is one of those times where you should just trust the guys who have had their swaps for a while and have done a ton of research into this.

Posts in this topic


Reply to this topicStart new topic
1 User(s) are reading this topic (1 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: December 3rd, 2024 - 3:22 PM