SAFC ii on 1996+ Celica, HELP Options

[CheesyLobster]

I just got an apexi safc-ii used for my car. After looking at the how to for not that long i realized that the 1994-1995 ST Celicas have different wiring for the ECU than the 1996-1998. I've looked around for instructions and have consulted my Chilton book (which seems to make things more confusing) and havent been able to find anything. Can someone PLEASE give me instructions/ecu pin outs for my 1996 ST?
THANKS

EDIT: Sorry, might want to move this to wiring.

This post has been edited by CheesyLobster: Sep 1, 2005 - 7:26 PM

[playr158]

obd2 is different then obd1

96+ is obd 2

[CheesyLobster]

obd2 is different then obd1

96+ is obd 2
[right][snapback]330363[/snapback][/right]

Yeah i know, the ecu pinpoints are different on 96-98 STs. I actually compaired wiring diagrams and figured most of it out. I'll post what I found when I get a chance.

However, what I do need to know now is which wire I need to attach my RPM sensor wire to (the green one). In the diagrams its not specific enough. I suppose its just the tach wire (- coil) but I dont want to run a cable to my engine bay.

This post has been edited by CheesyLobster: Sep 1, 2005 - 10:56 PM

[CheesyLobster]

obd2 is different then obd1

96+ is obd 2
[right][snapback]330363[/snapback][/right]

Yeah i know, the ecu pinpoints are different on 96-98 STs. I actually compaired wiring diagrams and figured most of it out. I'll post what I found when I get a chance.

However, what I do need to know now is which wire I need to attach my RPM sensor wire to (the green one). In the diagrams its not specific enough. I suppose its just the tach wire (- coil) but I dont want to run a cable to my engine bay.
[right][snapback]330376[/snapback][/right]

I take it back, I'm not sure if I did the wiring right, I put my keys in the ignition and the safcii wouldn't turn on.

Please, anyone who has installed safc I or II on a 96-98 Celica help me. Or, if you have any ecu wire diagrams other than the chilton ones, those would be helpful too. thanks.