6G Celicas Forums

Welcome Guest ( Log In | Register )

> Swap help
post Sep 6, 2005 - 7:29 PM
+Quote Post
Rjb23



Enthusiast
*****
Joined Feb 8, '04
From KY
Currently Offline

Reputation: 0 (0%)




Ok, so the guy who was doing my swap totally messed up the wiring I'm assuming. I had DG do the wiring for him, and the car did start and idle. But he took the engine out and when he put it back in now won't start. Basically now he is passing the car back to me incomplete and not running, because he can't figure it out.

The car turns over just won't fire up. Any ideas at what I should start checking first?

And let this be a lesson to everyone if you have the know how just do the swap yourself and save yourself the headache!
 
Start new topic
Replies
post Sep 10, 2005 - 12:42 AM
+Quote Post
lagos



Enthusiast
*****
Joined Aug 31, '02
From Philadelphia, PA
Currently Offline

Reputation: 8 (100%)




QUOTE
Take a 17mm socket and crack open the connection at the top of the fuel filter, but be careful. Fuel will spray out (if you have pressure). If not, there's a problem



or you pinch the hose with your hand while you have the diagnostic box bridged and the key in the on positon


--------------------
15PSI - 30MPG - Megasquirt Tuned

Posts in this topic


Reply to this topicStart new topic
6 User(s) are reading this topic (6 Guests and 0 Anonymous Users)
0 Members:

 



Lo-Fi Version Time is now: January 11th, 2025 - 4:58 AM