 Riser block installation question..., drilled holes in the spoiler? |
 Sep 12, 2005 - 7:17 PM
|
 
|
 Enthusiast  Joined Nov 20, '04 From Carlisle, PA Currently Offline Reputation: 27 (100%)  |
Ok it seems I'm the only one having this problem...
Where the risers bolt onto the spoiler, does anyone already have the holes predrilled and have the metal threading in there? My spoiler only has the holes where it bolted to the hatch, not where the riser blocks bolt onto. So I drilled some holes in the correct place on the spoiler but I don't have a clue what to put in the hole to retain the bolt. I took some pictures, they're bad quality because its dark and I only had a camera phone.   If anyone can think of any suggestions besides going to a body shop it would be appreciated. 
|
Posts in this topic
Batman722 I did not have the holes pre-drilled. I drilled th... Sep 12, 2005 - 8:37 PM AMCMoe Thanks for the reply batman. I'll use silicon... Sep 12, 2005 - 8:56 PM Batman722 it all depends what size you have drilled for the ... Sep 12, 2005 - 9:14 PM
95ST QUOTE(Batman722 @ Sep 12, 2005 - 7:14 PM)it a... Sep 13, 2005 - 7:53 PM AMCMoe I thought about the 2nd one too. Do you think tha... Sep 12, 2005 - 9:17 PM Batman722 something that might help is here
http://www.this... Sep 12, 2005 - 9:35 PM AMCMoe Thanks! Those are great. I think I'm goi... Sep 12, 2005 - 10:02 PM playr158 second ones will come lose....
i used to use thos... Sep 12, 2005 - 10:23 PM AMCMoe hmm that wouldn't be good. Even if I put silic... Sep 12, 2005 - 10:26 PM AMCMoe Finally finished. Worked on them for 3 hours toni... Sep 13, 2005 - 9:54 PM  |
4 User(s) are reading this topic (4 Guests and 0 Anonymous Users)
0 Members:
| Lo-Fi Version | Time is now: January 12th, 2025 - 10:31 AM |