Very upset, dyno results Options

[StreetRacing10PS...]

ok, so i took my 7afTe to get dynoed today and was VERY unhappy with the results. at 8PSI it pulled a 93.5HP and 97.7Ft-lbs torque. thats less then stock!!! i have no clue what is wrong with my car. its def getting boost too because from 3-5 k u can feel it pull and then letting off the gas the BOV goes off. so i Have no clue what is wrong. if u have any idea whats goin on let me know. right now iam goin out to look at SRT-4s cuz i want a second car, this car just aint doin it for me.

[nik]

ok, so i took my 7afTe to get dynoed today and was VERY unhappy with the results. at 8PSI it pulled a 93.5HP and 97.7Ft-lbs torque. thats less then stock!!! i have no clue what is wrong with my car. its def getting boost too because from 3-5 k u can feel it pull and then letting off the gas the BOV goes off. so i Have no clue what is wrong. if u have any idea whats goin on let me know. right now iam goin out to look at SRT-4s cuz i want a second car, this car just aint doin it for me.
[right][snapback]334956[/snapback][/right]

THERE IS NO WAY YOU SHOULD BE MAKING THAT LITTLE POWER ON 8 LBS

ok first check all connectors then check the pipe right below the turbo it has a little metal nipple make sure there is a rubber cap on it.

i just dont understand something is wrong i dyno tested that hole kit kit 3 times and 3 runs each time take detailed pictures of everything also check to make sure all the bolts on the turbo housing are tight

edit: those numbers should be your stock whp almost seems like a pipe might be loose between the intercooler to the TB or a massive boost leak recheck the everything from manifold bolts to vacum line connection

can you put up the DYNO chart so i can look at it

I mean at only 4.5 psi i made 126.95 whp and 162.03 torque

This post has been edited by nik: Sep 16, 2005 - 1:04 PM

[StreetRacing10PS...]

ok, so i took my 7afTe to get dynoed today and was VERY unhappy with the results. at 8PSI it pulled a 93.5HP and 97.7Ft-lbs torque. thats less then stock!!! i have no clue what is wrong with my car. its def getting boost too because from 3-5 k u can feel it pull and then letting off the gas the BOV goes off. so i Have no clue what is wrong. if u have any idea whats goin on let me know. right now iam goin out to look at SRT-4s cuz i want a second car, this car just aint doin it for me.
[right][snapback]334956[/snapback][/right]

THERE IS NO WAY YOU SHOULD BE MAKING THAT LITTLE POWER ON 8 LBS

ok first check all connectors then check the pipe right below the turbo it has a little metal nipple make sure there is a rubber cap on it.

i just dont understand something is wrong i dyno tested that hole kit kit 3 times and 3 runs each time take detailed pictures of everything also check to make sure all the bolts on the turbo housing are tight

edit: those numbers should be your stock whp almost seems like a pipe might be loose between the intercooler to the TB or a massive boost leak recheck the everything from manifold bolts to vacum line connection

can you put up the DYNO chart so i can look at it

I mean at only 4.5 psi i made 126.95 whp and 162.03 torque
[right][snapback]334978[/snapback][/right]

Their is no rubber cap on the nipple, i dnt think their ever was either. iam goin to try and find somin that will fit on their and see if that helps